RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular station.
Searching a station automatically: Auto search
1 Select the band (FM 1 – 3, AM).
Each time you press the
button, the band changes as follows:
FM1 
FM2 
FM3 
AM
Selected band appears.
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually: Manual search
1 Select the band (FM 1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM1 
FM2 
FM3 
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold ¢ 
or 4 
until “M” (manual) starts flashing on the display.
2 Start searching a station.
To search stations of higher frequencies
To search stations of lower frequencies
When a station is received, searching stops.
CONTINUED ON THE NEXT PAGE
9