Whirlpool 3406874 warranty Troubleshooting, Common laundry problems washer, Problem Cause

Troubleshooting

Most laundering problems are easily solved if you understand the cause. Check the following lists for laundry problems you may have and their possible causes. Also refer to “Common washer/dyer problems” within this section for a washer/dryer checklist which can help you solve some simple problems without calling for service. If you still need help, see the “Requesting Assistance or Service” section.

Common laundry problems – washer

PROBLEM	CAUSE
Brown, yellow	• Chlorine staining
stains	• Iron in water heater or pipes; iron and manganese in water
Dye transfer	• Improper sorting
	• Load not immediately removed from washer after end of cycle
Gray whites,	• Improper sorting
dingy colors	• Water temperature too low
	• Not enough detergent
	• Using soap in very hard water (use detergent in hard water)
Greasy looking	• Fabric softener poured directly on clothes
spots	• Not enough detergent or dispenser not used
Lint	• Improper sorting
	• Paper or tissue in pockets
	• Pilling being mistaken for lint
	• Not enough detergent
Load too wet	• Cold rinses
after spin	• Cycle stopped before spinning is complete
Shrinking	• Fabric type (some knits stretch during manufacturing –
	laundering returns fabric to original size)
	• Care label directions not followed
Snags, rips,	• Items damaged before washing
and holes	• Misuse of color safe bleach (do not pour directly on clothes);
	dispenser not used
	• Sharp items not removed from pockets; fasteners not fastened
Stiff, rough	• Using soap in very hard water (use detergent in hard water)
fabrics	• Not enough detergent
	• Line drying
Twisting/	• Overloading
Tangling	• Clothes wrapped around agitator
Wrinkling	• Overloading (leave more room for permanent press and knits)
	• Load not immediately removed from washer after cycle
	• Warm rinse water
	• Cycle selection incorrect
Yellow areas	• Water temperature too low
(from body oils)	• Not enough detergent

33