Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Install the lint filter
Put the underside of the lint filter into overflow filter
then push the upside into overflow filter
After installation, please refer that the lint filter installed to the right station, otherwise the lint filter may be fallen off when washing, influencing your use.
overflow filter
lint filter
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm. or the drainage will not be smooth enough and cause incomplete drainage.
2.Do not step on or press the drain hose.
3.If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.
4.IF extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall be not less than 30mm, and the length shall
be not exceed 1.5m.
<10cm
<10cm
>
30mm
<1.5m
4