Recessed and closet installation instructions
Fire Hazard
l The dryer should be exhausted outside. Failure to do so increases the risk of fire.
l If washer/dryer is installed in a closet, the dryer MUST be exhausted outside. Failure to do so may cause a fire.
This washer/dryer may be installed in a recessed area or closet.
The installation spacing is in inches and is minimum allowable.
Additional spacing should be considered for ease of installation,
servicing and’compliance with local codes and ordinances.
If closet door is installed, the minimum unobstructed air openings in top and bottom is required. Louvered doors with equivalent air
openings are acceptable. Closet
btallation must be exhausted.
Other installations must use the minimum dimensions indicated.
To prevent large amounts of lint and
moisture from accumulating and to maintain drying efficiency, this appliance should be exhausted outdoors.
Recessed nonexhausted installation must use only the rear exhaust aosition and Exhaust Deflector. Part ido. 694609. 3’
l!!t
VkW
Recessed area minimum installation spa&Q.
Nate: tt recessed Installation is exhausted to the side or rear, 6 inches musl be avallable
above the washer/dryer but all other spacing can be 0 inches.
Cl$ses.etptallatton mud be exhausted
Closet Door
48sq.
1
24 sq.
Side VIW | r | Front Vlew |
|
CORPORATION
Product dimensions
k
t
Exhaust
Port No 3389589 Rev B
:c- 1990 Whfrlpool Corporal~on
Prepared | by WhIrlpool | Corporation. | Benton | Harbor, | Michlgon | 49022 | Pmted | in U S A |