Haier HWM120-AS, HWM120-BS, HWM120-CS user manual Midway spinning

Page 11

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin	(1) Put the gland in properly.

Please put in the gland properly even if the

laundries quantity is small.

PushGland

Push

	Proper The laundries	Proper	No gland
	are slanting

(2) Close the inner and outer cover of the spin tub.

	Outer cover of
	Outer cover of
	The spin tub
	The spin tub


	Inner cover of
(3) Spin for 1-2 minutes. The spin tub


3.Run the foam-removing spinning.
1 Set the fill selector handle on spin side and								Water inlet
								Water inlet
fill water for about 1 min.	Fill selector handle

In case water flows out from wash tub side due to too much inflow, please turn down the water tap a bit.

2Close the spin tub outer cover and spin for about 1 - 2 min.

WASH		INLET SELECT	OR	SPIN

9

Image 11

Contents Twin-tub Washing Machine Contents Water-filling translation Names of the partsSafety precautions Petrol Then push the upside into overflow filter Installation and adjustmentPut the underside of the lint filter into overflow filter How to change the direction of the drain hoses Pay attention to followings before washing the laundries Preparation before washingUsage of the detergent Musts in washingFill selection Washing sequenceMidway spinning Rinse with water-filing RinsingSpinning Remove lint Cleaning the overflow filterInstall lint filter Disposal after washingCleaning the overflow filter When the remained water is frozen Trouble-shooting Answers to questionTrouble-shooting Answer to question Gland One piece Twin-tub washing machine One set SpecificationPacking list Water inlet hose