Haier HWM55-13S user manual Midway spinning, Wash Spin

Page 11

Midway spinning

1.Put the laundries into the spin tub evenly and smoothly.

2.Spin

(1) Put the gland in properly.

Please put in the gland properly even if the

laundries quantity is small.

Push Gland

Push

Proper The laundries Proper No gland are slanting

(2) Close the inner and outer cover of the spin tub.

Outer cover of The spin tub

Inner cover of The spin tub

(3) Spin for 1-2 minutes.

3.Run the foam-removing spinning.

(1) Open the outer cover of the spin tub.

(2) Set the water-filling selector control

WASH SPIN

rod at the "SPIN" side. Fill water for about 1 minute.

If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling.

(3) Close the outer cover of the spin tub. Spin for 1-2 minutes.

9

Image 11
Contents Twin-tub Washing Machine Contents Names of the parts Meaning and description of the symbolsSafety precautions Petrol Do not tramp or press the drain hose Install the water inlet hose Select the water level Pay attention to followings before washing the laundries Preparation before washingUsage of the detergent Musts in washingWashing sequence Wash Spin Midway spinningRinse with water-filling RinsingSpinning Disposal after washing Cleaning the overflow filterCleaning the overflow filter If the laundries fall to the outer side of the spin tub Trouble-shooting Answer to questionPhenomena Reason Packing list Specification