BASIC OPERATION
Turning the power on
Check that the STANDBY indicator on the front panel is lit. Then press the POWER button either on the front panel or remote control.
STANDBY
POWER
POWER
or
(Remote control)
To turn the power off, press the button again. The STANDBY indicator will light.
NOTE: Keeping the unit in the standby state consumes a mini- mal 6.0 watts. If necessary, unplug the power cord from the AC outlet to turn off the power completely.
Please note, however, that the memorized data for the user files and disc information will disappear in a few days if the power is completely turned off.
Loading compact discs
Also see Page 22 for the manner of handling and taking care of discs.
1.Press the OPEN/CLOSE button either on the front panel or remote control, opening the disc storage door and exposing the carousel slots.
OPEN/CLOSE
OPEN/
CLOSE
or
(Remote control)
2.To select a specified slot to load a disc, turn the DISC/TRACK
jog dial or press the 
/ 
/ 
/ 
buttons to specify the slot number, which is shown as the “DISC” number on the display.
The carousel rotates to bring the specified slot to the load/unload position, which is in the center of the storage area.
DISC/TRACK | +10DISC |
DOWN | UP |
or
(Remote control)
3. Place the disc in a slot, with its label facing to the left.
DISC/TRACK
TRACK
DISC
DISC EJECT
POWER
SYSTEM
CONTROL
COMPULINK
ENHANCED
CD Label
CAUTION
•Do not put anything except CDs in the storage area.
•Be careful not to touch the playback mechanism in the unit.
•Up to 25 discs can be accessed at one time. Trying to insert or remove a disc which is not in the loading area may result in damage to the discs and unit.
•The disc needs to be placed vertically in the storage slot of this component. After taking the disc out of its case, grip the rim of the disc between your thumb and middle finger — be sure to keep the fingers on the narrow, outer- most strip where the surface is solidly bright.
•Do not try to put more than one disc in a single slot. The unit will be damaged.
NOTE:
4.Repeat step 3, or steps 2 and 3, to load discs in the storage. Up to 200 discs can be loaded.
5.When all necessary discs have been loaded, press the OPEN/ CLOSE button to close the storage door.
The carousel rotates to bring the disc at the loaded/unloaded position (in the center of the storage area) to the playback position.
CAUTION
Make sure to remove your hand from the storage opening before pressing the OPEN/CLOSE button.
Unloading/changing discs
1.Press the OPEN/CLOSE button to eject a disc in the playback position for unloading or changing.
OPEN/CLOSE
OPEN/
CLOSE
or
(Remote control)
7