Haier HWM70-0588H Install the water inlet hose, Confirm the water faucet, Remain Reserve

Page 8

Install the water inlet hose

Confirm the water faucet

Water faucet,suitable

Water faucet,not suitable

Outlet end surface

 

>10mm

 

It is required that the front end shall be longer than 10mm.

Reserve, remain time digitron

It displays "--" during detecting.

It displays remained reserve time (hour).

It displays total remained time (min). If the total time exceeds 99 minutes, it uses "A" on tens digit to represent100 minutes, and uses "b" to represent 110 minutes. E.g. "A3" represents 103 minutes.

It displays abnormal symbol in abnormal situation. (See to Page15)

"FUNCTION"button

During the normal,saving,speedily and comforter program,press the"function"button to select washing function procedure.

Selecting the"no detergent"function the no detergent digitron is on,the largest washing

rated is 4.0kg.the highest washing water level is"8".

Selecting the"disinfect"function,the "disinfect"digitron is on.

Not select the"no detergent"function the no detergent digitron is off, you can use the powder program.

As you select the"woollen","carpet"program,pressing the "function"button.the washing machine has no reaction.Pleaseuse the detergent destined for the washing laundries.

As you select the "standard" program,pressing the"function"button.the washing machine has no reaction.Please select the"normal"program.

As you select the"delicate"program,pressing the"function"button.the washing machine has no reaction.Pleaseselect the"saving"program or the"speedily"program

The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.

Connection between the water inlet hose jointer and the water faucet

1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the water inlet hose component. See to Figure 1.

Remain

Reserve

Air dry

Standard

Woollen

Carpet

Delicater

Program

Normal

Saving

Speedily

6min

Comforter

10 9

8 7

6 5

4 3

2 1

Function

No detergent

Disinfect

"POWER" button

Push the "POWER" button to switch on the power. Under power-on mode, push it to switch off the power. Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will switch off the power automatically after 5 minutes.

2.Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth,

otherwise it may leak water. See to Figure 3.)

Power

On/off

 

Program

Water

Function

 

level

 

Reserve

Air dry

 

 

 

 

LOCK

 

 

water inlet hose jointer

Slider

Screw

Sign plate

Lock level

Screw knife

Bushing

"RESERVE" button

"PROGRAM/AIR DRY"button

"WATER LEVEL"button

water inlet hose

Figure 1

Figure 2

Figure 3

The digitron displays the time remained (in minute) before the washing is finished.

Following full-auto program is available

Program

Application

Normal

Washing for normal laundries

The washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value among 4, 6, 8,and 10 automatically.

You can also set water level by yourself. After the machine is

3.Fasten the four screws evenly. See to Figure 4.

4 Take off the nameplate. Twist the fastening nut as per the indication of the figure to seal up the exit end face of the faucet. See to Figure 5.

remark: Before installation, the threading is 4mmabove the upper surface of the nut.

After installation, the threading is 2mm above the upper surface of the nut. See to figure 6.

About 4mm before twisting

About less than 2mm after twisting

Screw nut

Figure 4

Figure 5

Figure 6

 

 

Push down the reserve button. The reserve indicator light is on the digitron displays the reserve time of finishing washing (in hour).The time remain indicator light is on, indicating that the reserve function is running.

Push the reserve button can display the reserve state.

Saving

Quick washing for normal laundries

Speedily

Washing for light-soil

a few laundries

Comforter

Washing for big and thick laundries

Standard Standard saving washing for normal laundries

Woollen Washing for the woollen laundries, under 2.5kg

Carpet Washing for carpet and wearing bigger Laundries, under 3.0kg

Delicate Saving washing for light-soil laundries

Push down the program button continuously for more 2 seconds .After a beep sound , the program is changed into the Air dry program.then push the program button to select the different air dry time(0.5,1 ,2, 3 hours)

started, it will not set water level automatically. You shall push the start/pause button to make new setting.

If there's water inside the tub, the machine cannot detect the laundries and will display water level 6 .If wet laundries are put in, it may display water level 10. You must set suitable water level by yourself.

If Speedily program is selected, it will display water level 3 . When water level 2 is reached in water filling, it will perform washing while filling water. When water level 3 is reached, it will change to normal washing.

During operation of wash and rinse program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water.

The water level decided may be different from actual value because of the different moisture level of the laundries.

All the program that When water level 1 is reached,it will perform washing while filling water.When water level set is reached, it will change to normal washing.

You can set speedily woollen carpet delicate program by yourself, never changed. It is to set water level 8 highest during the standard program.

Image 8
Contents Page Contents Meaning and description of the symbols Packing listNames of the parts × Ï ä Ë μ Ã ÷Safety precautions Trouble-shooting answer to questionInstall it Be sure to pull off the power plug before maintenanceDisposal after washing DismantleInstallation and adjustment Page Install the water inlet hose Confirm the water faucetWater faucet,not suitable Remain ReserveUse the operation button Dismantle the water inlet hosePreparation before washing Put in the laundries