How to change the direction of the drain hoses
Figure 1 indicates the ex factory installation |
|
position of the drain hose. | Soft item |
Extend the drain hose from the side of wash tub | |
Put soft items on the ground. Lean the machine |
|
down gently with the front surface facing the |
|
ground. Take off the drain hose from the cabinet. |
|
Take the hose out of the fixing groove. |
|
(See to Figure 2). | Soft item |
|
Back
Front
Figure 1
Embed the drain hose into the groove along the side | Figure 2 |
of thewash tub in the order of (1)~(2), heading for the |
|
side of the wash tub. (See to Figure 3). |
|
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Extend the drain hose from the rear side
Extend to the wash tub side
Embed into the | Figure 3 |
groove in turn |
|
Take out the drain hose from the fixing groove. Extend it from the rear side as per the direction of the arrow. (When the drain hose is extended from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.)
(See to Figure 4).
Figure 4
Install the water inlet hose; Select the water level
Insert the water inlet hose into the 
out to dismantle it)
Select water level according to the quantity of the laundries.
Water level indicator
Wash
Adjust the water level adjusting lever to desired water level line.
Maximum 
Max 
Med 
Medium 
Min
Minimum
5