Table of Contents | Graco 257146, 277070, 277069, 249057, 249059

Warnings	. 2	Parts, Pump
Service	. 3	248204, 255968	16
Technical Data	15	248205, 249057, 249059, 277070, 257146	17
		253056	18
		Warranty	20

WARNING

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

DDo not exceed the maximum working pressure temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

DUse fluids and solvents compatible with equipment wetted parts. See Technical Data in all equip- ment manuals. Read manufacturer fluid and solvent warnings.

DCheck equipment daily. Repair or replace worn or damaged parts immediately. D Do not alter or modify equipment.

D Read all instruction manuals, tags, and labels before operating the equipment.

D Use equipment only for its intended purpose. Call your Graco distributor for information.

DDo not use 1,1,1--trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

DComply with all applicable safety regulations.

MOVING PARTS HAZARD

Moving parts can pinch or amputate your fingers.

DKeep clear of moving parts.

DDo not operate equipment with protective guards or covers removed.

DPressurized equipment can start without warning. Before checking, moving or servicing equipment, follow the Pressure Relief Procedure on page 3. Disconnect power cord.

SKIN INJECTION HAZARD

High-pressure fluid from gun, hose leaks or ruptured components will pierce skin. This may look like just cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

DDo not point the gun at anyone or at any part of the body.

DDo not put your hand over the spray tip.

DDo not stop or deflect leaks with your hand, body, glove or rag.

DDo not spray without tip guard and trigger guard installed.

DEngage the gun trigger safety when you stop spraying.

DFollow the Pressure Relief Procedure on page 3 if the spray tip clogs and before cleaning, checking or servicing the equipment.

2 310643