Temp Offset
(Advanced)
Temp Offset will adjust the temperature readout by the amount entered. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Temp Offset setting:
1.Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup menu.
2.Use the LEFT or RIGHT
Speed Calibration
(Advanced; with Temp/Speed only)
Speed Calibration will adjust the speed readout by the percentage entered, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, when the unit is in Advanced User Mode (see Setup Menu Tab: User Mode.)
To change the Speed Calibration setting:
1.Make sure you are in Advanced User Mode, then highlight Speed Calibration on the Setup menu.
2.Use the LEFT or RIGHT
56