Humminbird 405SX manual Simulator Operation, Feature Memory, What You See On-Screen

Page 9

USING THE 405SX

SIMULATOR OPERATION

the DOWN ARROW until “Simulator” is highlighted. When the screen times out, the unit will be in simulator mode.

When in simulator operation, the 405SX responds to control inputs as if it is in actual operation, so feel free to experiment, or to customize the unit for your particular operation.

To exit Simulator mode, power the unit off.

FEATURE MEMORY

If your 405SX is installed with a transducer connected, any changes you make to the set-up or User Options (see Control Functions) while in Simulator are retained in the unit’s memory. This allows you to use simulator to experiment with the various set-up options, and retain your selected settings for normal operation.

If you are using the 405SX in Simulator when no transducer is connected, any selected options are lost when the unit is powered off. The 405SX will return to Factory Settings, or options selected when last used with a transducer, if no transducer is connected.

IMPORTANT: A transducer must be connected to the 405SX in order to retain user settings selected when in simulator mode. If no transducer is detected, the unit defaults to pre-selected options when powered off.

What You See On-Screen

Your 405SX uses a 160 x 160 matrix FSTN LCD display. This display provides outstanding viewability in all light conditions over a wide range of temperatures.

At initial power-up, the 405SX uses settings that were set at the factory. After initial use, the 405SX will remember the settings you enter.

There are several elements on-screen that are common to all modes of operation.

7

Image 9
Contents Operations Manual 405SXSINGLEBEAMfishfinderThank YOU Table of Contents Accessories Installation PreparationInstallation Overview Parts SuppliedDetermining How to Mount Transducer Installation OverviewAlternate Transducers and Mounting Methods Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingBeginning Installation Beginning InstallationHOW Sonar Works Using the 405SXHOW Sonar Works Simulator OperationFeature Memory Simulator OperationWhat You See On-Screen What YOU see ON-SCREEN To best represent those conditions on-screen Water interferes with SonarScreen as regular clusters of ind What YOU see on Screen Instance, a small school Fish ID. The 405SX usesControl Functions Control Functions2D View Large Digit View Chart View Menu Functions Sensitivity. The Sensitivity function controls Menu FunctionsDepth Range Using the 405SX Lower Zoom Limit Bottom return. The left Side of the screen is aUsing the 405SX Triplog Using the 405SX Blacken in the display below the bottom. This gives Speed offset is remembered after power is disconnected Using the Diagnostic Feature Using DiagnosticMaintenance MaintenanceMAINTENANCE/TROUBLESHOOTING TroubleshootingNothing happens when I turn the unit on There is no bottom reading visible on the display There is no transducer detectedUnit comes on before I press POWER, and won’t turn off TroubleshootingMy unit loses power at high speeds Get gaps in the reading at high speedsWARRANTY/SERVICE Policy MAINTENANCE/WARRANTYHumminbird ONE Year Full Warranty Service PolicyCustomer Support Customer SupportFurther information on Humminbird products can be found at Specifications Page TOP