|
| |
Type I, Style A |
| Safety |
Installation | Read the installation section of all system component manuals before | |
| installing your equipment. A thorough understanding of system components | |
| and their requirements will help you install the system safely and efficiently. | |
|
| WARNING: Failure to follow these safety procedures can |
|
| result in personal injury or death. |
| • | Allow only qualified personnel to install Siemens Airfield Solutions and |
|
| auxiliary equipment. Use only approved equipment. Using unapproved |
|
| equipment in an approved system may void agency approvals. |
| • | Make sure all equipment is rated and approved for the environment in |
|
| which you are using it. |
| • | Follow all instructions for installing components and accessories. |
| • | Install all electrical connections to local code. |
| • | Use only electrical wire of sufficient gauge and insulation to handle the |
|
| rated current demand. All wiring must meet local codes. |
| • | Route electrical wiring along a protected path. Make sure they will not |
|
| be damaged by moving equipment. |
| • | Protect components from damage, wear, and harsh environment |
|
| conditions. |
| • | Allow ample room for maintenance, panel accessibility, and cover |
|
| removal. |
| • | Protect equipment with safety devices as specified by applicable safety |
|
| regulations. |
| • | If safety devices must be removed for installation, install them |
|
| immediately after the work is completed and check them for proper |
|
| functioning. |
Operation | Only qualified personnel, physically capable of operating the equipment and | |
with no impairments in their judgment or reaction times, should operate this equipment.
Read all system component manuals before operating this equipment. A thorough understanding of system components and their operation will help you operate the system safely and efficiently.
2001 Siemens Airfield Solutions, Incorporated | 96A0027L | Page 3 |
All rights reserved | Issued 5/01 |
|