Teledyne 2002 instruction manual Operation

Page 30

8.2.Operation

The 4-20 mA output option board provides dual channel current output linearly proportional to the HPM 2002’s pressure reading. The first channel corresponds to the higher pressure range (0-1024 Torr). The second channel corresponds to the lower pressure range (0-1000mTorr). The equations below give the output currents for a given pressure:

16mA

I (channel1) = 4mA + (P(Torr))* ⎜

 

 

1024Torr

16mA

 

I (channel2) = 4mA + (P(mTorr))* ⎜

 

 

 

 

1000mTorr

Note that for both channels, the output is always between 4mA and 20mA. Specifically, when the pressure is below 1 Torr, channel 1 current will be approaching 4mA. Also, when the pressure is above 1 Torr channel 2 current will be saturated at 20mA.

149-072011 Model 2002 Vacuum Gauge

Page 30 of 38

Image 30
Contents Teledyne Hastings Manual Print History Table of Contents Model 2002 Sensors FeaturesGeneral Information Model 2002 Control UnitSpecifications Receiving Inspection InstallationTransducer Installation Quick StartPanel Mount Instructions Control Unit InstallationInitial Operation Transducer Cable AttachmentFront Panel Operation Overall Functional DescriptionScientific Notation RUN ModeSpeed Adjust Normal OperationCAL Mode High and Low Set Point ModesModel 2002 Vacuum Gauge GAS Mode Midrange Coefficient AdjustmentAtmosphere Coefficient Adjustment Units Mode Default Calibration RestorationRear Panel Description Remote Zero InputAnalog Output Voltage to pressure conversion example Power Entry Module TTL OutputsModel Rear Panel Detail Sensor Connector Theory of Operation Piezoresistive SensorDual Sensor Emodiment = ΔRL Pirani Sensor Et = Es + Er + EgEg = Kg DT As/Dx Dual Sensor Operation RS-232-E Interface Specifications Communications Option BoardInterface Connector Pin Assignments for RS-485 For RS-485 Half Duplex 2 wireInterrogation Commands Parameter Modification CommandsCalibration Adjustment Commands Reset / Restore Commands Device StatusRelay Board Specifications Relay Connector Pin AssignmentRelay Interface Option Board 20 mA Interference Connector Pin Assignments MA Interface Option BoardOperation 0-10V Interface Connector Pin Assignmets 10V Interface Option Board= PTorr Channel1 Troubleshooting Guide Warranty Repair Policy Non-Warranty Repair PolicyDiagrams and Drawings Model 2002 Vacuum Gauge Model Outline Dimensions Model 2002 Vacuum Gauge
Related manuals
Manual 54 pages 12.52 Kb Manual 37 pages 47.27 Kb

2002 specifications

Teledyne 2002 represents a significant advancement in the realm of sophisticated instrumentation and systems used across various industries. This innovative platform emerged as a versatile solution for a multitude of applications including environmental monitoring, industrial automation, and scientific research.

One of the most notable features of the Teledyne 2002 is its robust data analysis capability. Equipped with powerful processing units, it allows users to conduct real-time data analysis, ensuring accurate and timely results. This is particularly beneficial in fields where immediate decision-making is crucial, such as environmental assessments and industrial quality control.

The technology behind the Teledyne 2002 encompasses a variety of sensors and analytical instruments. Its modular design enables users to customize the system according to their specific needs, integrating various sensors such as gas analyzers, spectrometers, and temperature sensors. This flexibility makes the Teledyne 2002 applicable in diverse settings, from laboratory environments to rugged field conditions.

Another characteristic of the Teledyne 2002 is its user-friendly interface. The system is designed with an intuitive control panel and advanced software that provides comprehensive data visualization. This ease of use enhances productivity, allowing operators to facilitate complex analyses without extensive training.

Security and data integrity are also focal points of the Teledyne 2002. The system implements state-of-the-art encryption protocols to protect sensitive data. Moreover, it maintains compliance with industry standards, ensuring that the collected data is reliable and trustworthy.

In addition to its technological features, the Teledyne 2002 is built with durability in mind. The rugged construction allows it to withstand harsh environmental conditions, making it ideal for outdoor applications. Its compact design enables easy transportation, which is essential for fieldwork.

Moreover, the Teledyne 2002 includes connectivity options that facilitate seamless integration with existing systems. It can connect to cloud services, enabling remote monitoring and data storage. This feature not only enhances the functionality of the device but also allows for collaborative data sharing among teams.

Overall, the Teledyne 2002 symbolizes a convergence of advanced technology, user-centric design, and robust performance. With its extensive features and versatility, it stands out as a premier solution for professionals demanding precision and reliability in their analytical endeavors. Whether for environmental monitoring or industrial applications, the Teledyne 2002 is equipped to meet the challenges of modern data analysis.