Samsung 940MW Setup-Area Configuration, Language, Sleep Timer, Off, 30, 60, 90, 120, 150

Area	When you turn the power on of the product for the first time since it released
Configuration	from a factory, menu to select location will appear.
	Choose the region and country where you use the monitor.
	This is because broadcasting type varies according to region and country.
	You can select broadcasting type in OSD menu as well by selecting MENU-
	Setup-Area Configuration.
		This product can be used worldwide if area configuration is set
		up regardless of broadcasting type.
		If country is not selected properly, the product may not locate
		channels.
Language	You can choose one of 8 languages.
		The selected language is only applied in the Monitor Screen
		Settings menu.
		It has no effect on any software running on the computer.
Sleep Timer	Turns the monitor off after a pre-determined period of time.
	Off, 30, 60, 90, 120, 150, 180

Transparency Change the opaqueness of the background of the OSD.

High

Medium

Low

Opaque

Blue Screen If no signal is being received or the signal is very weak, a blue screen

	automatically replaces the noisy picture background. If you wish to continue
	viewing the poor picture, you must set the "Blue screen" mode to "Off".
	On / Off
Reset	Picture parameters are replaced with the factory default values.
	- Available in PC Mode Only
	Image Reset
	: Image parameters are replaced with the factory default values.
	Colour Reset
	: Color parameters are replaced with the factory default values.

Image Reset

Colour Reset