Playing sources | 05 |
Expanded
This mode is especially designed to give sound depth to stereo sources. The overall effect builds a dynamic and broad sound space, allowing
5-Channel Stereo
This can be selected to give
Choosing the input signal
You need to hook up a component to both analog and digital inputs on the back of the receiver to select between input signals.
•DVD 5.1 ch is only available when DVD/LD is selected as the source.
•This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, 48kHz, and 96 kHz) and DTS digital signal formats. With other digital signal formats, set to ANALOG.
•You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 14) and set the signal input to DIGITAL.
•Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
•You can only select DIGITAL if the source you selected is assigned to a digital input. See page 38 for more on the digital input settings.
|
|
|
|
| INPUT |
|
|
|
| MULTI JOG | SELECTOR |
|
|
|
| ENTER |
|
|
|
|
|
| MASTER VOLUME |
STEREO/ | SIGNAL | MONITOR | MIDNIGHT LOUDNESS | TONE QUICK SETUP |
|
DIRECT | SELECT |
| |||
|
|
|
| DOWN | UP |
|
|
|
| MULTI JOG |
|
•Press SIGNAL SELECT (front panel) to select the input signal corresponding to the source component.
Each press switches between AUTO, DVD 5.1 ch, ANALOG and DIGITAL. The default is AUTO.
When set to DIGITAL, 2DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.
Using Stereo/Direct
When you select STEREO or DIRECT, you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital and DTS multichannel sources are downmixed to stereo. See the previous page for more on these modes.
•Press STEREO/DIRECT (STEREO on the
If you switch on Midnight listening, Loud- ness, or the Tone controls when DIRECT is selected, the receiver automatically switches to STEREO.
31
En