English | NX Wind transducer set |
NX Wireless Wind transducer
Installation Manual
Thank you for choosing a Nexus product. Through this manual we would like to help you to install your new Nexus product. Please read through this manual carefully before starting your installation. This unique wind transducer provides both wind speed and wind angle relative the boat. If a Speed transducer is connected to the system, true wind speed and angle is computed. In addition, a compass or GPS antenna may be used to compute true wind direction relative North
This transducer set can be used in any Nexus Network system. It may even be installed in a Nexus or NX2 system substituting the standard wired transducer.
1 IMPORTANT Installation information!
BEFORE placing the wind transducer on the mast, a pairing procedure must be done!
1.1Location
The transducer should be mounted on a horizontal surface in the mast head. If the masthead is not horizontal a shim has to be added. A 15 shim for Seldén masts is available (art.no
2 Part specification
1# Mounting instruction 1# Warranty card
1# Bracket
1# Representation list
3 Mounting in the mast head
The transducer permits any type of horizontal mounting angle.
Mount the unit by directing the pipe (1) down and backwards in the bracket (2). Secure the nut (3) towards the attachment BY HAND (tools can be needed when demounting). Attach the security clamp (4) behind the nut.
4