Milwaukee pH51 instruction manual PH51 Waterproof Meter Operators Manual, Battery Replacement

BATTERY REPLACEMENT:

pH51 is supplied with BEPS (Battery Error Pre-venting System) which avoids any erroneous reading due to low battery level, by switching the meter off. To replace the batteries unscrew the battery compartment cap and replace all three 1.5V batteries while paying attention to their polarity.

Make sure the gasket is in place before screwing back the cap.

Batteries should only be replaced in a nonhazardous area using the battery type specified in this instruction manual.

WARRANTY:

This meter (base unit) is warranted from all defects in materials and manufacturing for a period of two years.

The electrode (probe end) is warranted for a period of 6 months.

During this period, the required repair or replacement of parts, where the damage is not due to negligence or erroneous operation by the user, will be effected free of charge.

WARRANTY REGISTRATION:

Please go to our web site and register your unit at

http://www.milwaukeetesters.com/registration.html

Milwaukee Instruments

2950 Business Park Drive

Rocky Mount, NC 27804

Phone # 252-443-3630

_________________________________

US Only -- Toll Free

877-283-7837

PH51 WATERPROOF METER OPERATORS MANUAL