5. Attach the cable cover
¥Use six of the M4 x 10 screws (included) to attach the cable cover.
6.Switch on the power of all the attached external equipment
When connected with a computer, switch on the power of the computer first.
7.Operate the attached external equipment
Display the signal from the desired input source.
8. Adjust the sound
Make volume adjustments when required.
9. Adjust the screen (See pages 20 and 21)
Make adjustments of the screen display position when necessary.
10. Adjust the image (See page 20)
Make adjustments such as brightness or contrast when required.
11. Recommended Adjustments
To reduce the risk of the ÒImage PersistenceÓ, please adjust the following items based on the application being used: ÒSCREEN SAVERÓ, ÒSIDE BORDER COLORÓ (See page 24) ÒDATE & TIMEÓ, ÒSCHEDULE SETTINGSÓ (See page 21).
It is recommended that the ÒFAN CONTROLÓ setting (See page 24) be turned to ON also.
English
Downloaded From