Melnor Industries 94822 manual Hydraulic Lift Table, Specifications

1/4-TON CAPACITY

HYDRAULIC

LIFT TABLE

94822 Hydraulic Lift Table

Instructions and precautions

Visit our website at:

http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury.

Save this manual.

When unpacking, make sure that the product is intact and undamaged.

If any parts are missing or broken, please call 1‑800‑444‑3353

as soon as possible.

Copyright© 2010 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement

parts, please call 1‑800‑444‑3353.

Specifications

Unpacking

Note: When unpacking, use assistance when lifting the Hydraulic Lift Table from the box. Or set the packaging box sideways and slide the Lift Table out from the box sideways.

Caution: When lifting Hydraulic Lift Table from packaging box, be sure to grip the main frame. Do not just grip the Table. Doing so will only raise up the Table and keep the unit’s frame in the packaging box.

Important Safety Information

1.Do not exceed 1/4 ton (500 lb.) max weight capacity. Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.

2.Use only on flat, level and hard surface capable of supporting the Lift Table and any item(s) placed on Table. Evenly distribute load on Table to avoid tipping.

3.Use as intended only. Do not use Lift Table to lift or transport animals, pets, or people.

4.Assemble only according to these instructions. Improper assembly can create hazards.

5.Follow all hydraulic bleeding instructions specified in this manual.

6.Wear ANSI-approved safety goggles and heavy- duty work gloves during assembly and use.

7.Keep assembly area clean and well lit.

8.Keep bystanders out of the area during assembly.

9.Do not assemble when tired or when under the influence of drugs or medication.

10.This product is not a toy. Do not allow children to play with or near this item.

11.Use as intended only.

12.Inspect before every use; do not use if parts are loose or damaged.

13.Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.