Stearns Safety & Survival 1189 manual Freezing Temperatures, Other USE Guidelines

Page 9

FREEZING TEMPERATURES

Never use in below freezing temperatures, unless worn partially inflated. At or below 40° F (4° C) inflation time with CO2 gas will be longer. Wearing a partially inflated PFD in these conditions will provide some initial buoyancy while the PFD fully inflates.

Caution: Do not fully inflate orally and then inflate with the CO2 cylinder. Repeated CO2 inflation after oral inflation will damage the PFD to the point that it will not hold air or float.

OTHER USE GUIDELINES

1.Always wear your PFD when underway unless you are inside a cabin.

2.If you need to jump from any height always fold arms over your chest to keep the PFD in place when entering the water.

3.Avoid all unnecessary activities that will be abrasive to the device.

4.Use extreme caution around sharp objects.

5.Avoid unnecessary exposure to the sunlight. See GENERAL PRODUCT LIFE EXPECTANCY on Page 10.

6.CO2 gas from the cylinder will permeate through the chamber fabric over time. If you are in the water for a long time, it may be necessary to top off the inflatable orally, by blowing air in through the oral tube.

7.Inflatable PFDs are not designed for activities in which the wearer expects to encounter impact with the water at a high speed such as water skiing, riding personal watercraft, etc.

8.Inflatable PFDs are not designed for white water activities.

IV. IS YOUR PFD IN GOOD AND SERVICEABLE CONDITION?

Check your PFD between outings to be sure that it is properly armed; that it is free of rips, tears or holes; that all seams are securely sewn; and that the fabric, straps and hardware are still strong. Inspect the inflatable portion of the PFD in accordance with Care and Maintenance Instructions.

9

Image 9
Contents Approval Conditions and Carriage Requirements Do not Remove Prior to SaleMechanism Parts List Specifications IndicatorsInflation System Harness FIT and Sizing Information Harness USE InstructionsAdditional Harness Information II. Mandatory Carriage RequirementsIII. Instructions for USE How to Inspect the Mechanism Read below for More Detailed InformationInspecting Your PFD For Damage Donning Instructions Inflated Donning InstructionsWear your PFD over, not under clothing Inflation Instructions Other Inflation PrecautionsDo not Twist or Wring Inflatable Chamber to Deflate Deflation InstructionsFreezing Temperatures IV. is Your PFD in Good and Serviceable CONDITION?Other USE Guidelines Users Inspection Rearming Kits Care and Cleaning InstructionsStorage RepairVII. HOW and WHY to Test Your PFD? VI. WHY are Pfds Required Safety EQUIPMENT?Make sure it floats you Make sure it worksYour fully armed PFD, HOW do YOU Test Your PFD Using Manual INFLATOR?HOW do YOU Test Your PFD Using the Oral INFLATOR? IX. Hypothermia VIII. Wear Your PFDSome Points to Remember About Hypothermia Protection XI. Additional Information CO2 Permeation Loss Do not Attach Pfds to Your BoatBuddy Line Information StearnsRepacking Instructions Printer id