Tyco Electronics E190089 manual Install the APR Calibration file onto your computer

Page 2

Install the APR Calibration file onto your computer

a)Insert the touchmonitor’s USB memory stick into your computer module’s available USB port.

b)Copy the monitor’s APR calibration file from the Calibration USB drive to the folder: C:\Program Files\Elo Touchsystems\APRdata

c) In the APRdata folder, rename the file to “AprCF.bin” and restart PC.

d)Keep this monitor’s USB memory stick or Calibration file in a safe place. DO NOT LOSE THE CALIBRATION FILE! It is unique to your touchmonitor and is required for your touchmonitor to function. You will need this file again if you connect this touchmonitor to a different computer module, if you reinstall touch drivers on the same computer module or if you recover or reinstall the operating system.

Image 2
Contents Digital Signage Computer Module Install the APR Calibration file onto your computer