3M 1420E-iD, 1420-iD manual Dual Marker Locate, ID Marker Depth

Page 11

E. Dual Marker Locate

Step 1. Press Locate/OK [5].

Step 2. Press Marker [SK].

Step 3. Press MARKR 1 [SK Toggle] to select desired Utility.

Step 4. Press MARKR 2 [SK Toggle] to select desired Utility.

Note: Only the marker types enabled in the setup menu will be shown. (See 4.C. Enabling/Disabling Marker types). When scanning for markers, the Gain Level [12] should be set high.

−− The third and fourth soft key commands will populate with the types of utilities selected for Marker 1 and Marker 2.

Step 5. Adjust the Gain [4] down until the bar graphs open.

−− The bar graph will close, the audio will increase, and the Signal Strength

[10]will be maximum when the locator detects a marker of the specified utility.

−− When one of the two markers is detected, press the “XXX Only” [SK] for the detected utility marker. (“XXX” represents the marker types selected. In the above example, PWR Only and TEL Only.)

−− The unit will switch to Single Marker Locate in order to pinpoint the marker.

Step 6. Press Markr 2 [SK Toggle] to return to Dual Marker Locate.

F. iD Marker Depth

Step 1. Lower the tip of the locator to the ground over the targeted marker.

Step 2. Press Depth [SK].

−− The locator will examine the marker (Calculating, please wait...)

−− If the marker is a 3M™ iD Marker, the

locator will display the depth of the marker, and its identification (serial) number.

78-8130-6741-6 Rev G

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 3M Dynatel Electronic Marking System Marker Locator 1420-iD Contents Rev G Intended Use Safety InformationQuick Start Locator Battery InstallationCleaning the Locator Unit Service and AccessoriesID Locator Keypad and Display Definitions Main Menu Menu DisplaysRev G Locating 3M Electronic Markers and 3M iD Markers Click Initial ConfigurationSingle Marker Locate Enabling/Disabling Marker TypesID Marker Depth Dual Marker LocatePassive Electronic Marker Non-iD Depth Menu 6 + Data/Templat SK2 + User Templat SK2c Creating/Editing Templates for 3M iD MarkersCreating New Templates Rev G Editing Templates Writing 3M iD Markers Menu 6 + Write Mode SK1Rev G Modifying Marker Data to be Written Press Menu 6 + Write Mode SKRev G Rev G Menu 6 + Data/Templat SK2 + Read History SK2a Reading iD MarkersReviewing Marker Read/Write History Read HistoryCommunicating with the GPS Device Capturing the GPS Coordinates Capture Mode / ModeGPS Compatibility Operation Write History SKMenu6 + More SK4 + Help SK8 Help ModeSending iD Marker Data to GPS Capture-Transmit Mode / Mode Menu 6 + COM Setup SK3 + GISMenu 6 + More SK4 + Self Test SK7 Self Test Of LocatorEnvironmental and Regulatory Specifications Locator Specifications 1420-iDKg 4 lbs Hours Locator Specifications 1420E-iDM 40 in Power, Water M 78 60 cm 24 M 60 M 72 M 96 15 cm 6 30 cm 12 61 cm 24 60 cm 24Rev G Important Notice Electrical Markets Division

1420-iD, 1420E-iD specifications

The 3M 1420E-iD and 1420-iD are advanced recordable digital audio transcribers designed primarily for professionals in various sectors, including legal, medical, and business. These devices stand out for their ease of use, exceptional audio quality, and robust feature set, ensuring efficient and reliable documentation of spoken words.

One of the key features of the 3M 1420E-iD and 1420-iD is their innovative recording technology. These devices utilize a high-fidelity microphone that captures audio with remarkable clarity, making it easier for users to transcribe recordings accurately. This high-quality audio ensures that every word is clear, reducing the chances of misunderstandings or errors in transcription.

The 1420E-iD model comes equipped with built-in rechargeable batteries, allowing for extended use without the need for constant replacement. This feature is especially beneficial for users who rely on these devices for long recording sessions, providing convenience and peace of mind.

Both models include a user-friendly interface, with intuitive buttons that allow for easy operation during recording and playback. The devices are equipped with advanced bookmarking features, enabling users to mark important sections of their recordings for quick reference later. This is particularly useful in professional settings where specific details need to be highlighted for further analysis or review.

Additionally, the 3M 1420E-iD and 1420-iD boast compatibility with various file formats, facilitating seamless integration with different software and devices. Users can easily transfer recorded files to their computers or other devices for editing and storage. This versatility enhances workflow efficiency and ensures that users can manage their recordings with minimal hassle.

Furthermore, the lightweight and portable design of these transcribers makes them highly convenient for on-the-go professionals. Users can carry the device in their bags or even pockets, ensuring they are always prepared to capture important information during meetings, consultations, or interviews.

In summary, the 3M 1420E-iD and 1420-iD are powerful tools that combine high-quality audio recording with user-friendly features. With their advanced technology, portability, and efficient file management, these digital audio transcribers are essential for professionals seeking to enhance their documentation processes and maintain high standards of accuracy in their work.
Top Page Image Contents