Installing the Canopy Cover | C. E. Smith 52100 specification

Installing the Canopy Cover:

The first step in assembling your Ttop is to lace on the Sunbrella cover (purchased separately in the color of your choice). Since you are installing a new Ttop, you will find lacing the cover is much easier if you do it on a table before mounting the canopy frame onto the uprights. Or you may choose to wait until after the Ttop is fully installed and do the lacing while standing on your boat’s gunnels. If possible, work in a clean open area as you will have 70 feet of cord to lace. It is easier to avoid tangles if you can straighten out the cord as you proceed from grommet to grommet and you don’t want to get the white cord dirty.

1.It is easiest to lace the canopy with the frame on a table at a comfortable working height. This process will take about 45 minutes.

2.Figure # 4 shows how to center the canopy on the frame using the 8 ties supplied. Orient the cover with the SMITH label down and aft. (the navigation light bracket on the frame is located toward front.)

3.Figure # 5 shows how to run the lacing. Begin lacing from any eyelet and just lightly snug the cord as you go so as to keep the canopy centered on the frame.

4.Lace only one grommet at the time. Pull all the cord thru each grommet before moving to the next grommet. As you lace to a grommet with a tie, remove the tie and discard it. (Don’t try to lace several eyelets and then pull the cord thru them all at once. If you do, the cord will kink and make you cuss.)

5.Figure #5 shows the best way to tie off the lacing with the least visible knots.

6.Figure #6 shows what the finished lacing should look like after you tighten the lacing and work the two knots (one on top and one on the bottom) snug to the lace start/stop grommet.

7.When finished, clip the cord close to the knots and flame melt a nice ball of nylon to prevent un-raveling and to set the knot.

8.The nylon cord and the Sunbrella will stretch and you will need to re- tighten the cord to take a foot or two of cord out in a few days.

Drilling and Installation:

9.The hard part is behind you and you are ready to begin installation.

10.Being very careful not to disturb the feet as you move from one to the next, use the Sharpie to mark all 16 foot screw holes.

11.Use the feet as drill guides to avoid drill bit walking. ( a big problem on textured decks)

52100 specifications

The C. E. Smith 52100 is a highly regarded product in the world of marine accessories, particularly known for its versatility and reliability. This model is predominantly designed for boaters who demand high-quality fittings and equipment for their vessels. One of the standout features of the C. E. Smith 52100 is its robust construction, which incorporates premium materials ensuring long-lasting durability even in harsh marine environments.

One of the primary characteristics of the C. E. Smith 52100 is its corrosion-resistant finish. This feature is particularly important for marine applications, as saltwater and humidity can quickly degrade lower-quality materials. The C. E. Smith 52100 comes with a proven track record of performance, making it ideal for extended exposure to challenging conditions.

Moreover, the design of the C. E. Smith 52100 emphasizes ease of installation. It is often equipped with pre-drilled holes, allowing for quick and hassle-free mounting. This aspect is particularly beneficial for boat owners who may not have extensive mechanical experience, ensuring they can set up their equipment without professional assistance.

The C. E. Smith 52100 also features advanced engineering technologies that contribute to its functionality. For instance, many of its components incorporate innovative locking mechanisms that enhance safety and stability. This ensures that accessories remain securely in place even during turbulent movements on the water.

Another notable characteristic is the ergonomic design of the C. E. Smith 52100. Many users report that its handles and grips are designed for comfort and ease of use, which is crucial for those spending long hours on the water. This attention to user experience underscores C. E. Smith's commitment to producing not just functional, but user-friendly products.

In terms of versatility, the C. E. Smith 52100 can be employed for a variety of applications, including rod holders, storage brackets, and other accessory installations. Because of its adaptability, it appeals to both recreational and professional boaters, catering to a wide range of needs in the marine sector.

In summary, the C. E. Smith 52100 stands out in the marine accessory market due to its significant features, like corrosion resistance, easy installation, advanced safety mechanisms, ergonomic design, and versatile applications. These attributes demonstrate C. E. Smith's commitment to quality and functionality, making it a reliable choice for boaters seeking to upgrade or maintain their vessels effectively.