White Rodgers 37-0882C installation instructions Installation Instructions, Description

Page 1

Hot Water Controls

WHITE-RODGERS

Remote Type

INSTALLATION INSTRUCTIONS

Operator: Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

These hot water controls were designed for use on hot water heating installations but they may be used on other heating applications to control the temperature of other fluids. The fluid they are to be used with must not be corrosive to copper.

These controls have capillary tubing between the temperature sensitive bulb and the switch mechanism so that the switch mechanism can be mounted at any convenient location while the temperature sensitive bulb is located in the fluid to be controlled.

These controls have special contacts which are suitable for use on low voltage and millivolt (thermocouple generator type) circuits as well as line voltage equipment such as gas valves, oil burner motors, etc.

PRECAUTIONS

THESE CONTROLS MUST BE INSTALLED BY A QUALIFIED INSTALLER

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and ordinances.

This control is a precision instrument, and should be handled carefully. Rough handling or distorting components could cause the control to malfunction.

This control has been accurately calibrated at the factory. any attempt to calibrate this control will void the White-Rodgers warranty.

WARNING

Do not use on circuits exceeding specified voltage. Higher voltage will damage control and could cause shock or fire hazard.

CAUTION

Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dan- gerous operation.

Following installation or replacement, follow appliance manufacturer's recommended installation and/or ser- vice instructions to insure proper operation.

CAUTION

To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.

Shut off main gas to heating system until installation is complete.

If the equipment manufacturer recommends a control location, follow such recommendations. If none is offered, the following recommendations should be observed.

When used to control the temperature of a vat or tank, locate the control bulb in a place representative of the average tempera- ture. Make certain that the fluid being controlled is not injurious to the copper element.

When used for high limit service on a heating boiler, the control should be installed in the riser close to the boiler, or in a boiler tapping that is near the top or hottest section of the boiler. If the boiler is also used to heat domestic hot water, make sure that the high limit control is not in that section of the boiler that contains the heat exchanger or piping for domestic hot water.

INSTALLATION

When used for low limit or operator service, the control should be located near that section of the boiler that contains the heat exchanger or piping for domestic hot water.

Be careful to avoid damage to the capillary tubing between the control and the temperature sensitive bulb. This tubing should be led over a path that will protect it from cuts, blows, wear due to vibration, etc.

CAUTION

Do not dent or bend the bulb as this will change the control calibration and cause it to cycle at a tempera- ture lower than the dial setting.

WHITE-RODGERS DIVISION

 

EMERSON ELECTRIC CO.

 

9797 REAVIS RD., ST. LOUIS, MO. 63123

 

(314) 577-1300, FAX (314) 577-1517

Printed in U.S.A.

9999 HWY. 48, MARKHAM, ONT. L3P 3J3

 

(905) 475-4653, FAX (905) 475-4625

 

PART NO. 37-0882C

Replaces 37-0882B & 37-9025 9546

Image 1
Contents Precautions Installation InstructionsInstallation DescriptionSetting the Control WiringPièce No 37-0882C PrécautionsCâblage Réglage DE LA Commande

37-0882C specifications

The White Rodgers 37-0882C is a highly efficient digital thermostat designed for optimal temperature control in residential heating and cooling systems. Known for its user-friendly interface and advanced features, it is an excellent choice for homeowners looking to enhance their indoor comfort while being mindful of energy consumption.

One of the standout features of the 37-0882C is its large, easy-to-read backlit display. The screen displays both the current and set temperatures, making it simple for users to monitor and adjust their home climate with ease. The thermostat is programmable, allowing users to set specific heating and cooling schedules tailored to their daily routines. This feature not only ensures comfort at all hours but also contributes to energy savings by automatically adjusting temperatures when no one is home.

The White Rodgers 37-0882C is compatible with a wide range of HVAC systems, including gas, oil, and electric heating, as well as heat pumps. This versatility makes it suitable for various home setups, ensuring that almost any homeowner can benefit from its advanced controls. The thermostat employs adaptive Intelligent Recovery, which learns how long it takes for a space to reach the desired temperature and activates the system accordingly, ensuring that comfortable conditions are achieved at the right time without wasting energy.

A key technology integrated into the 37-0882C is its precise temperature sensing capability. It features advanced sensing technology, which ensures accurate readings and more efficient temperature control, thereby enhancing comfort while minimizing unnecessary energy use. Additionally, the thermostat includes a filter change reminder, helping maintain optimal air quality and system efficiency by alerting users when it's time to replace air filters.

Moreover, the White Rodgers 37-0882C is designed with an intuitive interface, making it easy for users to navigate through its features without requiring extensive technical knowledge. This approachability ensures that anyone can set and fine-tune their heating and cooling schedules effortlessly.

In summary, the White Rodgers 37-0882C is an ideal digital thermostat for those seeking a blend of comfort, versatility, and energy efficiency. Its range of programmable features, compatibility with various systems, and intuitive design make it a valuable addition to any home, providing effective climate control while promoting energy savings.