Step Fourteen:
Connect to Electrohydraulic unit at number 2. Be sure to seat this connection firmly.
(Other connections per autopilot installation manual.)
Figure 18
Step Fifteen:
Turn the system on by pressing and releasing the Deckmount button (On/Off switch). The Deckmount will continue to flash for 30 seconds, but the throttle functions will work while it is flashing. With the manual throttle at idle, press and hold the up arrow on the handheld as shown in Figure 19, until the actuator rod (threaded rod) is fully retracted. It should move freely without any binding.
Figure 19
10