If you forget the password, you must reset the unit to access the databank.
Use the end of a straightened paper clip to gently press the reset button located on the back of your unit.
If the unit does not reset after pressing the reset button, remove the batteries, wait at least two minutes, and then
Warning! Resetting the unit erases all user- entered information. Always keep written copies of your data.
To Set a Password
1.Press .
2.Use to highlight Set Password and press ENTER to select it.
3.Type a password and then press ENTER. Your password can have up to 8 letters. You are prompted to retype your password.
4.Type your password again exactly as you did the first time.
5.Press ENTER to confirm and enable your password.