Atlona AT-HDWP-RSNET user manual Wall Plate Installation

Wall Plate Installation

C

A B

There are four pieces that will need to be interconnected in order for the AT-HDWP-RSNET to be installed in the wall. The electrical box (picture A), the Decora HDBaseT module (picture B), the Decora face plate (picture C) and the CAT cable.

The first step in installation is to connect the cat cable to the Decora HDBaseT module and install it into the electrical box (as seen above).

Note: Use the four 5/16” Phillips head screws to install into the electrical box, these screws will be unpainted.

atlona.com	5	Toll free: 1-877-536-3976
		Local: 1-408-962-0515