Cobra Electronics MR HH475 Channel Scan Mode, Memory Location Scan Mode, To Enter Channel Scan

Page 21

Operating Your Radio

Scanning

SCAN Button

SCAN Icon

Channel Up/Down Buttons

36 English

Advanced Operation

Channel Scan Mode

During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels.

NOTE

The radio must be squelched for Channel Scan mode to function. See page 20 for Squelch procedure.

To Enter Channel Scan:

1.From Marine Standby mode, press the SCAN button. The radio will immediately begin to scan the entire channel map selected in the active channel map.

The SCAN icon will show on the LCD.

2.A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

3.Press the Channel Up/Down button to resume scanning the Channel Scan channels or to change the scan direction.

4.To EXIT Channel Scan mode, press the SCAN button again. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode.

Operating Your Radio

Memory Location Scan

A

A

MEM/ESC Button

SCAN Button

Advanced Operation

Memory Location Scan Mode

During Memory Location Scan mode, the radio will rapidly scan through all pre-assigned memory channels.

NOTE

The radio must be squelched for Memory Location Scan mode to function. See page 20 for Squelch procedure.

NOTE

If there are fewer than two (2) memory locations programmed in the radio, the Memory Location Scan option will not be available. To program at least two

(2) memory locations, see page 34.

To Enter Memory Location Scan:

1.From Marine Standby mode, press the MEM/ESC button.

2.Press the SCAN button. The radio will immediately begin to scan all pre-assigned memory channels. The SCAN and MEM icons will show on the LCD.

3.A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

4.Press the Channel Up/Down button to resume scanning the Memory Location Scan channels or to change the scan direction.

5.To EXIT Memory Location Scan mode, press the SCAN button again. The SCAN and MEM icons will disappear from the LCD and the radio will return to Marine Standby mode.

Nothing Comes Close to a Cobra® 37

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Our Thanks to You Customer Assistance Radio Controls IndicatorsFor Assistance in the U.S.A For Assistance Outside the U.S.ABacklit LCD Liquid Crystal Display Screen Backlit LCD Screen Product FeaturesTable of Contents General Precautions Important Safety InformationSafety Training Information Important Safety InformationRecommendations for Marine Communication Recommendations for Marine CommunicationFCC Licensing Information Wrist Strap and Belt Clip Included in this PackageBelt Clip Wrist StrapBatteries and Charger Installing the Battery PackInitial Charge Batteries and ChargerTo Remove Battery Pack from Radio Maintaining the Battery ChargeAlkaline Batteries Common Radio Functions Getting StartedGetting Started Radio Speaker and MicrophoneBacklight/Key Lock Button Channel Up/Down ButtonsScan Button Setup Mode Programming Setup Mode ProgrammingHigh/Medium/Low H-M-L Power Button To Toggle Between H-M-L Power ModesSquelch Control USA/International/Canada Channel MapsCall Tone Alert Roger Beep Mode Bluetooth Mode Pairing ProgrammingKey Tone Mode Call Tone SelectCall Tone Select Ring Tones Bluetooth Mode ProgrammingVOX On or Off To Change Between VOX On and OffTo Set Bluetooth On and Off Bluetooth Radio On/OffStandby/Receive Transmit To Set WX Alert On or OffNoaa Emergency Weather Alert Marine Standby and Receive Rx ModeNoaa Test Alert System Standby/Receive and TransmitChannel 16/9 Mode Weather WX Standby ModeAdvanced Operation Advanced OperationTri-Watch Mode Tri-Watch Setup To Program or Edit the Tri-Watch ChannelsUsing Tri-Watch Tri-Watch Scan Mode To Exit Memory Location Mode Memory Location ModeTo Program Memory Locations To Recall a Stored Memory LocationMemory Location Scan Mode Channel Scan ModeTo Enter Channel Scan To Enter Memory Location ScanUsing Rewind-Say-AgainTM Using Rewind-Say-AgainTMto Record Audio TransmissionRewind Operation ExampleInitiate a Phone Call Mobile Phone OperationAnswer Incoming Phone Calls To Initiate from the Mobile PhoneTo End Pairing At the End of the Day Using Voice DialLast Number Redial To Initiate a Voice Dial CallGeneral Bluetooth Operation and Frequently Asked Questions Maintenance Troubleshooting Floating FeatureBurp Feature Floating RadioVHF Marine Radio Procedures Voice Calling Voice CallingVessel Corsair is calling the vessel Vagabond Emergency Messages and Distress Procedure Emergency Messages Distress ProcedureRadiotelephone Calls Radiotelephone CallsMarine Emergency Signals Marine Distress ProcedureIf You Hear a Distress Call Limited 3-Year Warranty Warranty and Trademark AcknowledgementExclusions This limited warranty does not apply For Products Purchased In The U.S.ASpecifications Product ServiceProduct Service SpecificationsVHF Marine Channel Assignments Port Operations Public Correspondence Marine OperatorNavigational Maritime Control03A 01A04A 05A19A 18A20A 21A28B 25B61A 62A66A 79A 78A80A 81AWeather Channel Assignments Weather Channel AssignmentsAsignaciones de canales meteorológicos Accessories AccessoriesLong Life Battery Lapel Speaker/Microphone

MR HH475 specifications

The Cobra Electronics MR HH475 is a robust and versatile marine handheld VHF radio designed for boating enthusiasts who prioritize safety and reliability on the water. This device is ideal for both recreational and professional mariners, featuring a wide range of functionalities that ensure seamless communication in challenging maritime environments.

One of the standout features of the MR HH475 is its impressive 6-watt transmission power. This allows for clear communication over long distances, making it essential for safety during unforeseen emergencies. Coupled with its robust range of channels, including all United States, Canadian, and international VHF marine channels, users can easily stay connected with other vessels and coastal services, ensuring reliable communication at all times.

The MR HH475 also showcases the latest technology with its Integrated GPS functionality. This feature provides accurate location tracking, which is invaluable during emergencies when a vessel’s position needs to be communicated quickly. The built-in GPS can transmit the vessel's coordinates over the radio, enhancing overall safety and response times in crisis situations.

Another notable characteristic is its Dual Watch feature. This function allows users to monitor two channels simultaneously, ensuring that they don't miss important communications while they are engaged in other conversations. The dual watch capability is especially useful in busy maritime areas where multiple channels are in use.

In terms of durability, the MR HH475 boasts a waterproof design, meeting the JIS7 standard. This means it can be submerged in water for a limited time without suffering damage, reassuring users that it can withstand the rigors of marine environments. The radio is also compact and lightweight, making it easy to carry or mount on a boat without taking up valuable space.

Additional features include a built-in flashlight for enhanced visibility during nighttime operations and easy-to-use controls with a backlit display for usability in low-light situations. The Cobra MR HH475 also supports NOAA weather channels, providing crucial updates on weather conditions, helping users make informed decisions while out on the water.

Overall, the Cobra Electronics MR HH475 is an excellent choice for those looking for a reliable marine VHF radio with advanced features like GPS and dual watch capabilities, marrying performance with the durability needed for life on the water. Whether for sailing, fishing, or emergency preparedness, this device stands out as a trusted companion on marine adventures.
Top Page Image Contents