Common MR F300 Functions
Operating Your Handset
Home Button
Pressing this button enables you to return the handset to Standby mode from any other mode.
Voice Dialing / Last Number Redial
This button serves two functions:
Operation
Operating Your Handset
Operation
•
Once the CobraMarine Bluetooth handset has been paired with a cell phone, incoming calls can be answered and outgoing calls can be made.
Standby
While waiting to receive or make a call, the handset will be in Standby mode.
■To enable voice dialing.
■To redial the last number dialed from the handset.
Voice Dialing
You can activate your cell phone's voice dialing feature from Standby mode.
To Voice Dial A Number:
1. | Press and release the Voice Dialing / Last Number Redial button. |
2. | Say the name or phone number command following the audio prompt. |
Standby Mode
PAIRED TO
XXX
VOL MENU LOG CONT
The upper part of the screen shows the Waiting For A Call icon and the cell phone signal strength.
The Function buttons (from left to right) will activate display of the Volume screen, the Menu screen, the Call Log screen and the Phonebook screen.
The Up and Down Arrow buttons will also adjust handset speaker volume directly while in Standby or during a call.
The display screen will show the progress of dialing and connecting the call. |
NOTE
Incoming Call
When the active paired cell phone receives a call, the ring tone will sound and it will be announced on the handset screen.
Your cell phone must have voice dialing enabled and voice commands recorded to use this feature with the F300.
To Redial The Last Number Dialed:
1.Press and hold the Voice Dialing / Last Number Redial button for two seconds. The display screen will show the progress of dialing and connecting the call.
Function Buttons
The Function buttons provide different utilities to different modes of handset operation. In any mode, the active functions are shown directly above the buttons on the display screen as shown in this Standby display.
Incoming Call Display
INCOMING CALL
+1 555 566 1234
ANSWER IGNORE
Answered Call Display
Ringing
The call can be answered by pressing either the Answer Function button or the Green Phone button.
If the Ignore Function button is pressed, the call will not be accepted, but will be recorded in the Call Log.
Answered Call
The Mute Function button will disable the microphone, but allow you to continue to hear the calling person.
To end the call and return to Standby mode, press either
Functions
PAIRED TO
XXX
VOL MENU LOG CONT
In this example, pressing the second button from the left will display the Menu.
Function Names
Function Buttons
CONNECTED
+1 555 566 1234
MUTEEND
the End Function button or the Red Phone button.
Caller information like name and number of the incoming caller will only be shown if it is available on your network and/or device.
10 English
Nothing Comes Close to a Cobra® 11