Ambient Devices WS-0202 manual Introduction, Getting Started, Parts List, Recommend Tools

1. Introduction

Thank you for your purchase of the Ambient Weather WS-0202 Wireless Rain Gauge with Indoor Temperature. The following user guide provides step by step instructions for installation, operation and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:

http://ambientweather.wikispaces.com/ws0202

2. Getting Started

Note: The power up sequence must be performed in the order shown in this section (remote rain gauge transmitter first, Display Console second).

The WS-0202 weather station consists of a display console (receiver), and a rain guage (remote transmitter).

2.1 Parts List

QTY Item

1Display Console

Frame Dimensions (LxWxH): 4.50 x 2.75 x 1.25 in

LCD Dimensions (LxW): 2.0 x 1.5”

1Rain Gauge

Dimensions (LxWxH): 4.75 x 2.75 x 3”

2.2 Recommend Tools

∙Philips screwdriver

∙Drill for mounting rain gauge

2.3 Rain Gauge Sensor Set Up

Note: To avoid permanent damage, please take note of the battery polarity before inserting the batteries.

1.Remove the rain gauge cover, as shown in Figure 1. Push in the side tabs on both sides of the rain gauge cover and lift to expose the base.

2.Remove the battery cover, as shown in Figure 2. Lift both sides of the battery cover, exposing the battery compartment.

3.Insert two AA batteries into the battery compartment , as shown in Figure 3. Replace the battery cover and the rain gauge cover.

Version 1.0 ©Copyright 2010, Ambient LLC. All Rights Reserved. Page 2