Pioneer VSX-29TX manual Features

Page 4

Features

Decoding of Dolby Digital, Dolby Pro Logic and DTS (Digital Theater Systems)

DTS is the latest and most widely used digital theater system for cinemas throughout the world. The decoder has been incorporated into this receiver and is able to achieve high sound quality as well as produce dynamic sur- round sound effects. Also, there's no need to worry about program formats. When playing Dolby Digital, Dolby Pro Logic or Dolby Surround software in the (Dolby) Surround and HOME THX CINEMA modes, decoding switches on automatically according to the input signal, all you have to do is enjoy!

“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. Manufactured under licence from Digital Theater Systems, Inc.

Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic”, and double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992 - 1997 Dolby Laboratories, Inc. All rights reserved.

Direct Energy MOS amplifier

The VSX-29TX receiver incorporates 5 independent 120 watt built in power amplifiers, with high-performance Hex power MOS FET output transistors. This construction provides improved linearity and accurate reproduction of each channel for true high fidelity reproduction from even the most demanding Dolby Digital and DTS program sources.

True Home Cinema with THX® Certification

The HOME THX CINEMA surround mode employs special processing to allow you to enjoy movie soundtracks with the same level of power and realism you experience in well designed movie theaters. You can enjoy this effect with both Dolby Digital, Dolby Surround and DTS sources.

Manufactured under license from Lucasfilm Ltd. Lucasfilm and THX are trademarks of Lucasfilm Ltd.

Advanced Theater Modes

This mode enhances the sound of either film or music so a more dramatic effect can be achieved. The four modes are each designed to accentuate specific sound qualities, giving the listener a wide range of possibilities.

DSP Surround Modes

DSP (Digital Signal Processing) surround mode gives you the capability of transforming your living room into six different sonic environments when listening to music.

Midnight Listening Mode

Midnight Listening mode allows you to obtain excellent surround sound effects even when listening at low volumes, something that was previously impossible.

Digital Noise Reduction

Digital Noise reduction is the latest technology for filtering out unwanted noise. It produces clear, resonant tones.

New LCD Remote Control

This touch sensitive screen remote control is the latest in convenient technology. It's easily viewed screen can access a huge amount of different buttons. Instead of the old method where one button had to perform many tasks, this remote can instantly change screens, allowing one button to have just one, clearly marked purpose.

This remote can be used to operate a variety of other components simply by recalling the appropriate setup codes or by using the learning function to teach the remote control new commands. In addition, the multi-operation functions allow you to perform a variety of operations automatically.

The Energy-saving Design

This unit is designed to use minimal electricity when power is switched OFF (in Standby mode). Regarding the power consumption in standby mode, refer to “Specifications” on page 74.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents VSX-29TX For Canadian model Important NoticeImportant Safety Instructions Information to UserFeatures Table of Contents Checking the Supplied Accessories How to Use This ManualPreparing the Remote Control Before You StartInstalling the Receiver Opening the Front PanelConnecting Your Equipment Cassette deck placementAudio Components Audio cordsFront Video ComponentsAudio/Video cords Digital audio cords/Optical cables Digital ConnectionsOptical cable External Decoder Input Example Connection for a DVD/LD or LD playerDVD/LD player Or LD player Components equipped with 5.1 channel analog output jacksUsing external antennas AntennasAM loop antenna To improve FM receptionPowered sub woofer SpeakersSpeaker terminals Front SpeakersSpeaker placement Connecting Additional Amplifiers Power connections AC OutletsSwitched Total 100 W 0.8 a MAX Unswitched 100 W 0.8 a MAXDisplays & Controls = Master VolumeFront Panel Signal Select button See p.38 @ Loudness button See p.41 Tape 2 Monitor button See p.59# Midnight button See p.40 $ Digital NR button See p.39Display Remote Control Receiver Main Screen Basic Receiver LCD ScreensReceiver SUB Screen Initial Set Up Setting Up the Remote ControlPress Remote Setup on the remote control Press the LCD Commander buttonInitial Set Up Setting Up for Surround Sound Speaker Setting Press Setup OK to return to the System Setup Menu If you want to change a setting before proceedingChannel Delay MenuChannel Level Press the Channel Level buttonAuto automatic Test Tone Manual manual Test ToneManual mode Auto modeIf you are using a Sound Pressure Level SPL meter Crossover Network Press Crossover Network Choose a crossover frequency80 Hz 100 HzBass Peak Level Manager Dynamic Range Control Digital Input Select Basic Playback Playing Source with Stereo SoundHome THX Cinema mode Standard modeSound Modes Stereo mode DSP modesHall JazzSelecting a Sound Mode Select the sound modeSurround operation Press ReceiverPlaying Source with Dolby Digital or DTS Sound Back LightSwitching ANALOG/DIGITAL Signal Input Reducing noise during playback Digital NR function 96kHz 24bit PerformanceExternal decoder playback Listening in Midnight Listening ModeMain screen or on the front panel Adjusting bass and treble tone control Listening in Loudness modeBass + Direct playback Adjusting the brightness of the display front panel onlyPress FL Dimmer Automatic and Manual Tuning Using the TunerMPX Mode Direct Access Tuning To cancel before inputting the frequencyPress Tuner Press Band button on the remote to select the band FM or AMUsing the front panel Memorizing Frequently Used StationsTune in the station you want Press Memory to activate the memory functionUsing the remote control Recalling Memorized StationsUse the number buttons to select the channel you desire To step through each channel in orderSetting Up the Remote Control to Control Other Components Remote Control of Other componentsRecalling settings stored in the remote control Exit Select Function blink on the remote control If you want to cancel the Remote Setup modePress the Learning button You want to control the Tuner button cannot beLock symbol Locking the SettingsPress Exit to return to the LEARNING/SELECT Function screen Using Remote Control with Other Components DVD or LD player operationsCD player operations Disc= RDM ~ Track= Edit Mode MD operationsName ~ DispStandard TV screen TV operationsDigital TV screen STB DTV operations Catv operationsDigital Tuner screen STB satellite tuner operations Satellite Tuner screenOFF/ON L1-3Cassette deck operations DeckSINGLE/DECK REC MuteOther screen for preset operations VCR operationsTV/VCR CD-R operationsUsing Other Functions Recording from Audio ComponentsRecording from Video Components Record monitor Tape 2 MonitorMulti Operations Performing multi operations System OFF FUNCTION. Press the Receiver buttonUsing System OFF Select a stop or a power commandPress Exit to leave the System OFF set up mode Press the System OFF buttonResetting the Remote Control Setting up the direct functionSet up example Multi-RoomMULTI-ROOM connections Sub room IR receiver MR-100MULTI-ROOM set up Select the Volume Level by pressing Variable or FixedPress the Multi Room button Select the IR Receiver typePress the Multi Room & Source button Using the front panel with the MULTI-ROOM systemPress the Control button Press Masuter Volume +/- to adjust Using the remote control with the MULTI-ROOM systemVolume Control Techno Tidbits & Problem-solving Dolby DigitalLaser disc format Comparison with Dolby Pro Logic SurroundDolby Digital DTSDolby Pro Logic SurroundTroubleshooting Symptom Cause RemedyFM broadcasts AM broadcastsAnalog Specifications 0 4 2 1 1 4 0 Maintenance of External Surfaces Power cord CautionEIA
Top Page Image Contents