Maxon Telecom SP-130, SP-140 operating instructions Maintenance

Page 17

Maintenance

Your SP-130/140 Series Radio is designed to be maintenance free. To keep your radio in good working condition:

Clean external surfaces with a clean cloth dampened in a solution of dishwasher detergent diluted in water. Apply the solution sparingly to avoid any moisture leaking into cracks and crevices. Do not submerge the radio. Use a non-metallic brush to dislodge stubborn particles, if necessary. Dry the surface thoroughly with a soft, lint free cloth.

DO NOT use solvents or spirits for cleaning - they may permanently damage the housing.

Clean the battery contacts on the back of the radio with a lint free cloth to remove dirt, grease, or other foreign material that may impede good electrical contact.

15

Image 17
Contents SP -130/140 Series About Maxon America, Inc About Your SP-130/140 Series RadioTable of Contents Safety Information Unpacking Information SP-130/140 Series Features Description of Radio Components Page Installing and Removing the Battery Pack Antenna InstallationTo Install Attaching and Removing the Belt ClipBattery Charging and Care SP-130/140 Series Operations Power On-VolumeTransmit ReceivePower Off Status Indicators and Audible Alert TonesPriority Channel Scan Scan ModesNormal Channel Scan Look Back Any channel, when not in the scan mode, can be Other Scanning FeaturesService Licensing and Service InformationRecycling/Disposal of Batteries FCC LicensingSoftware Copyrights Maintenance Limited Warranty Maxon America, Inc Business Radio Division