Icom IM402A Transmitting Position Report call, Push Dscic to transmit the Position Report call

6 DSC OPERATION

DTransmitting Position Report call

Transmit a Position Report call when you want to announce your own position to a specific ship and to get an answer, etc.

qPush [DSC•IC] to enter the DSC menu.

wPush [Y] or [Z] to select “ ,” and push [DSC•IC].

Scrolls

ePush [Y] or [Z] to select the desired pre-programmed in- dividual address.

•The ID code for the position report call can be set in advance. (p. 15)

rPush [DSC•IC] to enter the standby condition for Position Report call.

• Channel 70 is selected and “ ” appears.

tPush [DSC•IC] to transmit the Position Report call.

yAfter the Position Report call has been transmitted, stand by on Channel 70 until an acknowledgement is received.

• “ ” scrolls at the channel comment indicator.

Scrolls

uPush any key to exit the condition and return to the nor- mal operation.

24