Pioneer PDR-W37 manual Analog synchro recording, Press Input to choose the analog Line inputs

Page 40

8 Recording Other Sources

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿×óBÀö²³￿

3-COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER

SYNCHRO

OPEN/CLOSE

0

INPUT

7

¦￿ REC VOL

DISPLAY

CHARACTER

7

PUSH ENTER

CD TEXT Hi-bitLegatoLinkConversion

Analog synchro recording

Use the analog line inputs when recording from your turntable, cassette deck, or other analog audio source.

Note that double speed recording is not possible in this mode.

1Make sure that any discs loaded in the CD changer are stopped.

2Load a CDÐR or CDÐRW disc.

If it’s a blank disc, the display shows NEW DISC.

If the disc isn’t blank, use the DISPLAY button to check that there's enough space on it for what you want to record.

3Press INPUT to choose the analog

line inputs.

Pressing INPUT repeatedly switches the active input:

ANALOG – OPTICAL 1 – OPTICAL 2 – COAXIAL

The recorder's display indicates the current input.

4If you want to adjust the recording

level:

Start playing a sample of the source material, then turn the REC LEVEL knob to adjust the recording level (clockwise to increase or anticlockwise to reduce). Use the level meter to guage the the best recording level (the loudest sounds in the source should just reach 0dB on the meter; the red segments in the level meter should not light at all).

5Make sure that the source is not

playing, then press SYNCHRO.

Analog synchro recording will not work if the source is already playing!

Pressing SYNCHRO repeatedly switches the synchro mode:

•1-track synchro – recorder stops recording when it encounters more than 2 seconds of silence.

•all-track synchro – recorder starts a new track when it encounters another signal after more than 2 seconds of silence*. Recording stops when the recorder detects more than 5 seconds of continuous silence.

•all-track with finalize – as all-track synchro, but the recorder automatically finalizes the disc after recording. The SYNCRO indicator and SYNC(-1)will start to blink when the recorder is ready.

To cancel recording here, press 7.

6Play the source.

The recorder starts recording automatically.

Use the DISPLAY button to switch displays during recording.

7The recorder goes into record-pause

after recording.

Be careful: In all-track synchro mode, if the recorder detects another signal, recording starts again.

•If you're using all-track synchro with finalize, the recorder will start finalizing the disc after a minute of silence.

•Press 7to finish the recording before ejecting the disc.

*Track numbering may not work reliably for some sources (such as those which are very noisy, or those which contain pauses or very quiet sections).

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents PDR-W37 For U.S. model Information to UserImportant Safety Instructions For U.S. and Canadian modelsContents Using this manual Hints on installationBefore You Start Checking whats in the boxCD lens cleaner Power cord cautionMaintaining your CD recorder Moving the unitRecording and finalizing discs Recording copyright materialPlaying partially recorded discs Connecting Up Connecting a keyboard Keyboard controlsPower Ðoff / -ON- Press to switch the unit on Or off Controls and DisplaysFront panel Press to stop playback or recordingRecording. p.26,37 Remote controlProgram Program the playback track order. p.35,36 Display Disc 1/2/3 Indicates discs loadedQuick CD recording Setting the headphone levelRecording tracks during playback Power to switch on Getting StartedPlaying a CD Press OPEN/CLOSE 10 again to close the disc trayUsing the menu features Starting playback with a timerPlayback modes CD1 Switching the displayNEW Music Recording time left on CD-R/CD-RW disc CD-RTrack number / time remaining During recording, press Display to switch the display mode Total elapsed recording timeIntroduction Recording FeaturesRecording a CD Press REC Mode twice Recording individual tracksDisc you want to record Press CD=CD-R Start front panel OnlyHeres how to record starting from any point on the disc There are two recording optionsTo record 10/0Using CD text StoppedPress Name Jog dialEditing CD text Press Name to leave the track name mode Go to the track with the name you Want to copyPress Name Clip again Press the jog dial EnterAutomatically numbering tracks SecondsPress the jog dial Enter to confirm the new fade length ¥ Press Fader during recording to fade OutSetting the silence threshold Make sure automatic track number Ing is switched OFFManually numbering tracks Start recordingSetting the recording level Press 41 or Á¢ CD-R side To switch the copying speedHi indicator shows the selected speed x1 or Changing the recording speedSetting the balance Then press REC ModeWhen youÕre satisfied with Turn the jog dial until BalanceFinalizing a disc Finalizing and ErasingTOC O156 REC Erasing a Cdðrw disc Erase Last ? CD-RWErase ALL ? CD-RW Erase O2Ð1O ? CD-RWErase ALL ? Erase TOCInitialize ? CD-RW Skip indicator starts to blink Marking recorded tracks to skipO2 Skip SET? Play the track you want to to skip Press Skip SETPlaying a disc with skip IDs O2 Skip CLR?Clearing the playlist Playback FunctionsCDÐ Trkpgm ÐÐ Programming a playlist CD-R Using the repeat modesCdðr Trkpgm ÐÐ Using the random mode Fading in and fading outPress Random to start random playback Press Fader during playback to pause the discRecording Other Sources Monitoring a source for recordingDisplay shows monitoring infor Mation To stop monitoring, press 7 CD-R sideDigital synchro recording Press Input to choose the analog Line inputs Analog synchro recordingRecorder starts recording automatically For digital sources, check that Signal is compatible Adjust the recording level, if necessaryWhen youre finished, press 7 to stop Recording Press Input to choose the input to UseRecording blank sections While recording, or in record-pause Mode, pressTo finish the recording session here, press To restart recording, pressAdditional Information Digital signal interruptions Power interruptionsDigital recording restrictions Digital recording from DATUnderstanding display messages An attempt is made to startError messages Obstructing it. If the problem persists, contact aOpen the disc tray and reload the disc. Make sure Open the disc tray and make sure that nothing isMessages relating to recording When the Synchro button wasStop the source player. After a short time Troubleshooting Specifications We Want You Listening ForALifetime Page 00G00ZF0S00 Printed PRB1309-A

PDR-W37 specifications

The Pioneer PDR-W37 is a compact and feature-rich CD recorder that has become a popular choice among music enthusiasts and home audio aficionados. Designed for convenience and performance, the PDR-W37 seamlessly blends classic audio recording with modern technology, making it an excellent addition to any home stereo system.

One of the standout features of the PDR-W37 is its ability to record directly from various sources, including vinyl records, cassette tapes, and other audio equipment. This capability allows users to preserve their favorite music in digital form, offering the convenience of CD playback without the need for extensive technical expertise. The device is equipped with a high-quality A/D converter, ensuring that audio fidelity is maintained during the recording process.

The PDR-W37 supports multiple recording formats, allowing for flexibility in how users store their music. It can create standard audio CDs that are playable on most CD players, as well as CD-R and CD-RW discs, providing the flexibility to overwrite or edit recordings. This feature is especially useful for those who wish to compile customized playlists or record live performances.

In terms of technology, the Pioneer PDR-W37 utilizes a sophisticated digital signal processor, which optimizes sound quality by minimizing distortion and maximizing dynamic range. The onboard equalizer gives users further control over their recordings, allowing for adjustments that cater to individual listening preferences. Moreover, the PDR-W37 features an easy-to-read LCD display, which enhances usability by providing straightforward access to recording information and settings.

Another noteworthy characteristic of the PDR-W37 is its user-friendly design. The front panel includes intuitive controls for play, pause, record, and track selection, making it easy for users to navigate through their recording sessions. Additionally, it offers auto-track function capabilities, which automatically create new tracks based on silence detection during recording, thus simplifying post-recording editing.

With durable build quality and versatile functionality, the Pioneer PDR-W37 stands out as a reliable and efficient CD recorder. It combines the nostalgia of analog recording with the convenience of digital formats, making it an excellent choice for anyone looking to archive their music collection or explore the world of audio recording. Whether used for personal enjoyment or as a tool for music production, the Pioneer PDR-W37 delivers performance, quality, and ease of use.
Top Page Image Contents