Harbor Freight Tools 92372 operating instructions Specific Trailer Jack Safety Warnings

Page 3

should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician.

13.Replacement parts and accessories. When having serviced, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.

14.Do not operate product if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product.

15.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.

Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Specific Trailer Jack Safety Warnings

1.Roll away. Avoid situations which allow the trailer to roll away on the caster wheel and trailer wheels. If using the trailer jack on an incline, be sure to chock the wheels. Never leave the trailer unattended while on the jack if the wheels are not chocked.

2.Swivel failure. The swivel is very strong and exceeds the stated capacity of the jack. However abuse, corrosion or damage may cause the swivel to break. Regularly inspect the swivel for damage, and discontinue use if the swivel is damaged.

3.Loose mounting plates or hardware. Never operate this Trailer Jack if the mounting hardware is not secure on the tongue of the trailer. Regularly inspect the hardware for proper assembly.

4.Overloading. Never attempt to lift or support loads in excess of the rated strength of this Trailer Jack. Sudden failure of the Jack may result in serious personal or property

injury.

BE AWARE OF DYNAMIC LOADING!

Suddenly dropping a load on the trailer that the jack is attached to may create, for a brief instant, an excess load, which may result in damage to the product and/ or personal injury.

5.Swing up before driving. Always check to be sure that the Jack is properly swung up into its raised position before driving. Driving with the Jack lowered can cause serious damage to property. This Trailer Jack is not designed for highway use.

6.Dollying on uneven surfaces. The Tire on this Jack makes moving your trailer without a vehicle convenient. However, moving the trailer on uneven or inclined surfaces can cause personal injury or potential damage to the Jack or other property.

7.Not to be used for aircraft purposes.

SKU 92372

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents 500 LB. Swing Back Trailer Jack Specifications Safety Warnings and PrecautionsSave This Manual Specific Trailer Jack Safety Warnings Unpacking Assembly / InstallationDismounting The Trailer from The Towing Vehicle OperationUsing the Jack to Mount The Trailer to the Towing Vehicle MaintenancePlease Read the Following Carefully Parts ListAssembly Drawing