General Arrangement, Operation | MedCenter DB3 specs

All cable glands should be of an equivalent NEMA/IP rating to that of the unit and integrated with the unit such that this rating is maintained.

Once termination is complete, carefully push the cover back onto the unit, avoid- ing damage to the mating surfaces. Tighten the 6 off cover screws evenly, to ensure maintenance of the required gap between the cover and enclosure.

GENERAL ARRANGEMENT

		1011/16"
	23/32"	271mm
	23/32"	FIXING HOLE Ø 1/2" / 13mm
	53mm	FIXING HOLE Ø 1/2" / 13mm
	53mm

Ø 45/8" / 117mm

Ø 611/16" / 170mm

ALL DIMENSIONS IN INCHES AND MILLIMETERS

FIXING HOLES

Ø ALL 11/32" / 9mm (2 POS.)

2 x 1/2" NPT ENTRIES MAX

719/32"

193mm

13/16" 30mm

POSITION 2 IS USED IF ONLY 1 x 1/2" NPT ENTRY REQUIRED

3.OPERATION

The unit is initiated directly from the power source.

For all versions, a 5-way DIL switch selects the tone required from the list shown.

The DB3P includes two 5-way DIL switches to select any two tones from the list. These units can be switched between any two of the tones listed by either:-

·Reversing the polarity of the power supply, or

·By a 3 wire common +ve system, switching between the two –ve lines.

© MEDC 2001	06/01