Dell
9 BIOS
9.1 Overview
The PowerEdge M910 BIOS is based on the Dell BIOS core, and supports the following features:
•IA‐32 Intel Xeon 7500 chipset 4S
•Simultaneous Multi‐Threading (SMT)
•CPU Turbo Mode
•PCI 2.3
•Plug n’ Play 1.0a
•MP (Multiprocessor) 1.4
•Boot from hard drive, optical drive, iSCSI drive, USB key, and SD card
•ACPI
•Direct Media Interface (DMI)
•PXE and WOL support for on‐board NICs
•Memory mirroring and sparing
•SETUP access through <F2> key at end of POST
•USB 2.0 (USB boot code is 1.1 compliant)
•F1/F2 error logging in CMOS
•Virtual KVM, CD
•UEFI (Unified Extensible Firmware Interface) 2.1 support
The PowerEdge M910 BIOS does not support the following:
•Embedded Diagnostics
•BIOS language localization
•BIOS recovery after bad flash (but can be recovered from iDRAC6 Enterprise)
9.2 Supported ACPI States
The PowerEdge M910 supports the standard ACPI states. See http://www.acpi.info/for more information.
Dell PowerEdge M910 Technical Guide | 27 |