To program tracks/discs in a desired

VARIOUS OPERATIONS

To program tracks/discs in a desired	3	Press 3.
order (PROGRAM play)		The program play starts from the
		track that was programmed first.

÷	You can operate PD-F507 by remote control unit and also by the	DISC	TRACK	MIN SEC
		DISC	TRACK	MIN SEC
	main unit.
÷	You can program up to 32 steps			PGM

÷ The parenthesis ( ) show operations for the main unit.

Operation example) Programming disc 2 , track 7 as step 1, and disc 5, track 3 as step 2.

Press PGM (PROGRAM) during stop mode.

	PROGRAM
	(	)
			Use the digit buttons to
			select the disc, and press
	\		DISC SET.
	\		(Use DISC (–, +) to select the disc
			number,then press PROGRAM.)
(	=		)	The “PGM” indicator blinks.
			Use the digit buttons to
			select the track, and press
	\		TRACK SET.
	\		(Use 4/¢ to select the track
			(Use 4/¢ to select the track
			number, then press PROGRAM.)
				DISC	TRACK	MIN	SEC
							PGM
				DISC	TRACK	MIN	SEC
(	41 ¡¢	=	)				PGM
			Repeat steps 2 and 3 to
	\		program additional discs
	\		and tracks.
			Once	the track times have been
			added, the PGM indicator stops
			blinking and the following display
	\		appears (Total Time).
	\			DISC	TRACK	MIN	SEC
							PGM
(	=	=	41	¡¢	=		)

12VARIOUS OPERATIONS

The following operations can be performed during normal play

(Direct program)

1.Press PGM (PROGRAM). •Program mode is activated.

2.Press PGM (PROGRAM) during playback. •The current track is programmed

<Programming during normal playback (remote control only)>

(Pre-programming)

You can program during normal playback

(\ Operation example )

•The player changes to program play when the current track finishes playing back.

•To change to program mode directly, press 3.

The following operations can only be performed during stop mode

(Full disc program)

If you skip step of the operation example, disc 2 is programmed as step 1.

<Programming a pause (remote control only)>

(Pause program)

If you press 8 at step you can program a pause. When you press

8, “PA” appears in the display instead of the disc number.

÷For example, when making a program for recording both sides of a cassette tape, press 8 to insert a pause after programming the tracks for one side. After turning the tape over, press 8to resume recording.

Notes

÷You cannot program a pause as the first step, or program two pauses in a row.

÷When you program a pause, it counts as 1 step and reduces the total number of tracks you can program.

÷To erase a program...

Press 7 twice during playback (or once in stop mode). Press MODE or RANDOM in either play or stop mode. You can also erase the program by pressing PREVIOUS (or BEST in stop mode).

÷To cancel a program step

In stop mode, each time you press CLEAR, the last step in the program is erased.

÷If a programmed disc is missing or inserted backwards during program play, “**-no dISC” appears in the display, the step is automatically erased, and playback proceeds to the next step.

÷Program contents are stored in memory even when the power is turned off (STANDBY).

Notes!!

÷If stepis carried out before the accumulated time is displayed, the program play starts and the time is not displayed.

÷The display is not shown if the total time of the program is 100 minutes or more.

PD-F507, PD-F407 specifications

The Pioneer PD-F407 and PD-F507 represent a significant advancement in the realm of CD playback technology. Designed for discerning audio enthusiasts, these players epitomize Pioneer’s commitment to high fidelity audio and user-friendly features.

The PD-F407 is notable for its innovative Mega-Trax feature, allowing users to store and organize up to 300 CDs in a single unit. This capability transforms the typical CD player experience into a user-centric system, enabling quick access to a vast library of music. The PD-F507 takes this a step further with its enhanced loading system that accommodates 200 discs, offering even more convenience for extensive collections.

Both models utilize a high-performance digital-to-analog converter (DAC) for superior audio fidelity, ensuring clear and dynamic sound reproduction. The PD-F507 features an advanced 24-bit DAC, which significantly improves the clarity and depth of audio playback, delivering a rich listening experience. Additionally, both models are equipped with a precision CD transport mechanism, reducing digital jitter and enhancing overall sound quality.

Regarding connectivity, both players offer optical and coaxial digital outputs, making it easy to connect to external DACs or audio systems. The PD-F507 additionally includes a variable-level output, allowing for more versatile integration into various audio setups.

User-friendly features include a large LCD display that provides clear information about disc playback, track selection, and overall system status. Both models come with a remote control that enhances ease of use, enabling users to navigate their music libraries effortlessly.

The aesthetic design of the PD-F407 and PD-F507 is both modern and functional. With a sleek profile, these players easily integrate into any home entertainment system. The front-loading tray and intuitive button layout ensure seamless operation.

In summary, the Pioneer PD-F407 and PD-F507 are excellent CD players that blend advanced technology with practical features, catering to the needs of serious audiophiles. Their combination of high-quality audio performance, extensive storage capacity, and user-friendly design makes them standout choices for anyone looking to enhance their music playback experience.