Mustang Survival MD3025NV manual Check Your Inflatable PFD Before Using it

Page 4

Check Your Inflatable PFD

Before Using it

After purchasing your inflatable PFD, make sure it

has an unused 33 gram CO2 cylinder attached to the inflator mechanism (Fig. 1a).

Check the components and how to assemble the

inflator by following these steps:

1) Undo the Velcro™ flap on the back side of the pouch to expose the bladder and inflator (Fig. 1b).

2) Unscrew and remove the CO2 gas cylinder from the inflator and inspect its small end. If it

is pierced, replace it! (Fig. 1c).

3) Make sure the manual lever is in the up-and-ready position and insert the green

indicator pin if not already in place. Make sure

the CO2 cylinder is screwed hand tight into the inflator (Fig. 1a).

4) Check that the oral-inflation dust cap is

properly in the stowed position (Fig. 1d) Fig. 1a

Fig. 1b	Fig. 1c	Fig. 1d

p3

Image 4

Contents Page Do not Remove Prior to Sale Approval Conditions and Carriage RegulationsWhat is an Air-only PFD? Mandatory Carriage RequirementsInstructions for USE Sizing and FitCheck Your Inflatable PFD Before Using it Donning Instructions Deployment and Use of the PFD , Steps Inflating Your PFDRearming Your PFD After Manual Inflation Deflating the Buoyancy Cell Repacking Your Inflatable PFDPage Care and Maintenance Instructions Is Your PFD in Good and Serviceable CONDITION?Usage Below Freezing Mustang Inflatable PFD Safety Accessories Cleaning and Storing Your Inflatable PFD WHY are Pfds Required Safety EQUIPMENT?How and Why to Test your PFD It should inflate quick and easily · Learn how it works byHow do you Test your PFD using the Manual Inflator? How do you Test your PFD Using the Oral Inflator? Wear Your PFD HypothermiaExample L.P. Position Type III inflatable PFD illustrated Page Do not Attach PFDs to Your Boat Additional InformationBuddy Line WE Save Lives for a Living