Intel 150SX manual What YOU see ON-SCREEN, What You See On-Screen

Depth Range

Water Depth

USING THE 150SX

WHAT YOU SEE ON-SCREEN

What You See On-Screen

Your 150SX uses a 128 V x 64 H matrix FSTN LCD display. This display provides outstanding viewability in all light conditions over a wide range of temperatures.

At initial power-up, the 150SX uses settings that were set at the factory. After initial use, the 150SX will remember the settings you enter.

There are several elements on-screen that are common to all modes of operation.

Depth. The digital depth number shows the water depth directly beneath the transducer location.

Depth Range. The depth range is shown to the right of the screen. The upper number is 0 indicating the surface of the water. The lower number is one of the nine depth ranges available that best match the depth of the water. As the depth of the water changes, the range changes as necessary in order to retain a bottom representation on-screen.

When in Auto mode, the horizontal line at the top of the screen is the “zero line,” representing the surface of the water. Occasionally there is a gap in this line. This gap indicates the unit is updating the

display even if the bottom is not visible	Bottom Depiction	Zero Line
on-screen, or if the bottom information
is not changing.

New sonar information appears on the right side of the graphic area of the display and moves to the left as new information is displayed. The 150SX automatically selects the appropriate depth range to show the depth of water beneath the transducer. This range is selected so the bottom representation is typically shown about ²⁄₃ down the display.

8