You can save and recall up to 10 different plot trails, which can also be copied to your MMC for archiving or for transfer to your MapCreate software.
Tip:
Another quick way to stop recording one trail and begin a new one is to use the New Trail command: Press MENUMENU↓ to MY TRAILSENTENT.
Caution:
You also have the option of completely turning off trail re- cording, under the trail Options command. However, if the Up- date Active Trail option is left turned off, it will cancel the automatic trail creation feature.
Displaying a Saved Trail
The active trail is automatically displayed on the map (the "Visible" option) with the factory default settings. You can selectively turn trail display off and on for any saved or active trail. In the Saved Trails List, visible trails have a check mark in front of the trail name.
To turn off trail display:
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press ↓↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.
3.Press ↓ to VISIBLEENT. To return to the previous page, press
EXITEXITEXITEXIT.
To turn on trail display:
1.Press MENUMENU↓ to MY TRAILSENT.
2.Press ↓↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.
3.Press ↓ to VISIBLEENT. To return to the previous page, press
EXITEXITEXITEXIT.
Navigating Trails
There are three methods for following a trail: visual trailing, navigating a trail (forward) and backtracking a trail (backward). Try each method to see which you prefer.
Visual trailing is the simplest method. It uses only the Map Page and requires no menu commands at all. The technique works the same if you are running a trail forward (from start to end) or backward (from end to start.) However, visual trailing provides no navigation informa- tion during the trip, such as the time to your destination.
49