Chart Speed
The rate that echoes scroll across the screen is called the chart speed. The default is maximum. We recommend you leave the speed set at de- fault for virtually all fishing conditions.
However, you might consider experimenting with chart speed when you are stationary or drifting very slowly. You may sometimes achieve bet- ter images as you slow down the chart speed to match how fast you are moving.
If you are at anchor, ice fishing or fishing from a dock, experiment with a chart speed around 50 percent. If you are drifting slowly, try a chart speed around 75 percent. When you are stationary and a fish swims through the sonar signal cone, the image appears on the screen as a long line instead of a fish arch. Reducing the chart speed may result in a shorter line that more closely resembles a regular fish return.
Sonar Page menu (left) with Chart Speed command selected.
The Chart Speed control bar is shown at right.
If you experiment with chart speed remember to reset it to maximum when you resume trolling or moving across the water at higher speeds. To change chart speed:
60