Furuno FCV-292 manual Safety Information for the Installer

Page 6

SAFETY INFORMATION FOR THE INSTALLER

WARNING

Only qualified personnel should work inside the equipment.

This equipment uses high voltage electricity which can shock, burn, or cause death.

Turn off the power at the ship's mains switchboard before beginning the installation. Post a warning sign near the switchboard to ensure that the power will not be applied while the equipment is being installed.

Serious injury or death can result if the power is not turned off, or is applied while the equipment is being installed.

CAUTION

Ground the equipment to prevent electrical shock and mutual interference.

Ungrounded equipment can give off or receive electro-magnetic interference or cause electrical shock.

Confirm that the power supply voltage is compatible with the voltage rating of the equipment.

Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the equipment.

NOTICE

The mounting location must satisfy the following conditions:

Away from rain and water splash Out of direct sunlight

Away from air conditioner vents

Away from magnets and magnetic fields Moderate and stable in temperature and humidity

iv

Image 6
Contents Back 00080637800 Page Safety Information for the Operator Page Safety Information for the Installer Page Page Table of Contents Outline Drawing Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Transducer 50BL-12/50BL-24H New BLT Transducers NEW BLT Transducers Setting Page Color Video Sounder