Lowrance electronic X67C Color Modes, To change the Flasher or Ice Flasher page color scheme

Page 9

The following figure show the bottom target separation possible using the flasher's Split Zoom.

 

Fish signal 1

 

zoomed

Bottom zoom side

 

Normal range side

Fish signal 2

 

 

 

 

zoomed,

 

Depth range

about 3.5

 

 

60 feet

feet above

 

 

 

the bottom.

 

 

This scale shows 6

 

 

feet above the bottom

 

 

 

 

Fish signal 1

 

 

Fish signal 2

Bottom ColorLine

 

Bottom ColorLine

 

 

 

Notice the bottom target separation with Split Zoom mode.

Color Modes

Sonar Color Mode is described in detail in the manual on page 59. The additional ice fishing features have increased the number of options and how the color modes are controlled while using either the Flasher or Ice Flasher.

There are six color mode options for the flasher pages, and seven for the sonar chart page. The Ice Flasher default color is the IceView mode, but other settings may suit your eyes better.

For example, some of our fishing friends favor the striking green-on- black contrast of the Nightview mode…they use it a lot, even in broad daylight! Experiment with the color modes to see which ones work best for you under various fishing and lighting conditions.

To change the Flasher or Ice Flasher page color scheme:

1.From a flasher page, press MENU↓ to FLASHER OPTIONSENT.

2.Press ↓ to FLASHER COLOR MODEENT.

9

Image 9
Contents Addendum X67C IceMachineIntroduction to IceMachine Mode IceMachine Mode Operation To enter the IceMachine mode To adjust sensitivity Setting Sensitivity for Ice FishingSensitivity ColorLineBattery Gauge Sonar Signal Interpretation Signal band movementSignal band color Split Zoom Display Mode Signal band thicknessTo switch to Split Zoom Ice Flasher OptionsTo change the Flasher or Ice Flasher page color scheme Color ModesScouting Through the Ice
Related manuals
Manual 80 pages 14.42 Kb