M8 x 20
|
|
|
|
|
| Mounting plate | |
|
|
|
|
|
|
|
|
|
|
| M8 x 20 |
| Bracket (1) | ||
Fixing plate |
| ||||||
|
| ||||||
|
|
|
|
|
|
| Support |
Bracket (2) |
| plate (2) | |||||
|
|
|
|
|
|
| Support |
|
| M8 x | 20 |
| plate (1) | ||
|
|
| M4 x 12 | ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
(A) Assembling the mounting bracket
M10 x 25
(B) Fastening antenna to mounting bracket
How to assemble the optional mounting
bracket and mount the antenna
4.Unfasten three screws to open the cover.
5.Follow steps
3. INSTALLATION
•For maintenance and checking purposes, leave sufficient space at the sides and rear of the unit and leave slack in cables.
•Separate the display unit from a magnetic compass unit by the distances noted below to prevent interference to the magnetic compass:
Standard compass: 0.5 m
Steering compass: 0.3 m
•Be sure the mounting location is strong enough to support the weight of the unit under the continued vibration normally experienced on the boat.
Mounting
The display unit can be mounted on a desktop or overhead or flush mounted in a console.
Desktop, overhead mounting
1.Fix the hanger to the mounting location with four tapping screws (supplied).
2.Fit the knob bolts to the display unit.
3.Set the display unit to the hanger.
4.Tighten the knob bolts securely.
3.2 Display Unit Installation
Mounting considerations
When selecting a mounting location for the display unit keep in mind the following points:
•Keep the display unit out of direct sunlight.
•The temperature and humidity should be moderate and stable.
•Locate the unit away from exhaust pipes and vents.
•The mounting location should be well ventilated.
•Mount the unit where shock and vibration are minimal.
•Keep the unit away from electromagnetic
Flush mounting
Cutout a hole in the mounting area referring to the outline drawing at the back of this manual. Fasten the display unit with four screws (M4 x 20, supplied).
25