| card to this mode. This mode is also the default setting. |
| 802.11 B only – This card can be compatible with both 802.11g |
| and 802.11b wireless stations. If there are only 802.11b wireless |
| stations in the network, you can set the card to this mode. |
| 802.11 G only – This card can be compatible with both 802.11g |
| and 802.11b wireless stations. If there are only 802.11g wireless |
| stations in the network, you can set the card to this mode. |
Select Your Country Region Code | The available channel differs from different countries. For |
| example: USA (FCC) is channel |
| |
| country user located before importing. If you are in different |
| country, you have to adjust the channel setting to comply the |
| regulation of the country. |
B/G Protection | If you have a mix of 802.11b and 802.11g wireless stations in the |
| network, it is recommended to enable the protection mechanism. |
| This mechanism can decrease the rate of data collision between |
| 802.11b and 802.11g wireless stations. When the protection mode |
| is enabled, the throughput of the card will be a little lower due to |
| many of frame traffic should be transmitted. |
| Auto – Based on the status of the network and automatically |
| disable/enable protection mode. |
| On – Always enable the protection mode. |
| Off – Always disable the protection mode. |
Tx Rate | There are several options including |
| Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select. |
| When the “Auto” is selected, the device will choose the most |
| suitable transmission rate automatically. The higher data rate you |
| designated in the network, the shorter distance is allowed |
| between the card and the wireless stations. |
| When the wireless mode is “802.11 B only”, the maximum data |
| rate is 11Mbps (11b) so that there are only “Auto/1/2/5.5/11Mbps” |
| options you can select. |
Tx BURST | Tx Burst enables the card to deliver the better throughput in the |
| same period and environment. |
Parameter | Description |
|
|
Enable TCP Window Size | The TCP Window is the amount of data a sender can send on a |
| particular connection before it gets an acknowledgment back from |
| 24 |