Tekkeon MP3450i, MP3450-10 manual Charging myPower ALL Plus, Charging with a Power Adapter

Page 6

Charging myPower ALL Plus

To charge MP3450i, you can use either the included power adapter or a solar panel. The steps to charge with either of these devices are described in this section.

Charging with a Power Adapter

myPower ALL Plus will charge in four hours when completely empty. The green CHARGE indicator will turn on after the battery is 80% charged. Therefore, you should view the actual battery capacity before disconnecting the power adapter to stop charging. (Before using myPower ALL Plus for the first time, you must charge the device for four hours.)

1.Remove the output cord from the DC OUT jack, if connected.

2.Plug the power adapter into the DC IN jack on the end of myPower ALL Plus.

3.Plug the power adapter into a wall outlet. The red CHARGE indicator will turn on to indicate the battery is charging and is less than 80% charged.

4.When the green charge indicator turns on, press the Capacity Level Button to view the battery capacity. If the capacity does not indicate full (green LEDs on), continue to charge the battery until the battery capacity indicates full.

5.When the battery capacity indicates full, unplug the power adapter.

NOTE: myPower ALL Plus will automatically shut down the power input when fully charged, so you can charge it overnight.

Charging with a Solar Panel

You can charge myPower ALL Plus using a compatible solar panel. The solar panel can connect to the DC IN port, or the 3-Pin Input Port, depending upon the type of solar panel. The DC IN port is designed for use with a DC power adapter with constant current input. Charging myPower ALL Plus efficiently requires a minimum of 1A current output from the solar panel. In general, a 25W or higher

solar panel should provide sufficient power to charge myPower ALL Plus.

4

Image 6
Contents MP3450i/MP3450-10 User Guide Page User Guide Unpacking myPower ALL Plus OverviewGetting Started Getting to Know myPower ALL Plus Storing myPower ALL PlusCharging myPower ALL Plus Charging with a Power AdapterCharging with a Solar Panel Using myPower ALL Plus Connect the Power Output Cord Select/Connect the Adapter TipAdjust the Voltage Level Bottom of the unitVoltage Chart View myPower ALL Plus Battery Capacity Connect the Portable DeviceCharging the Extended Battery Using the Extended Battery MP3450-10Adding the Extended Battery Obtaining AdaptersTroubleshooting Limited Warranty Disclaimer of WarrantiesCustomer Support Cut loose. Stay loose
Related manuals
Manual 16 pages 37.99 Kb Manual 4 pages 53.81 Kb

MP3450-10, MP3450i specifications

The Tekkeon MP3450-10 and MP3450 are versatile portable power solutions designed to meet the ever-growing demand for mobile energy in an increasingly connected world. With a focus on convenience and efficiency, these models are popular among professionals, outdoor enthusiasts, and anyone needing reliable power on the go.

One of the standout features of the Tekkeon MP3450 is its robust battery technology. Equipped with a lithium-ion battery, it ensures a longer lifespan and efficient power management, allowing users to keep their devices charged for longer periods without the need for constant recharging. The MP3450-10 model boasts a capacity of 10,000 mAh, providing ample energy to power or charge various devices, including smartphones, tablets, cameras, and even some laptops.

The MP3450 series offers several output options, including USB-A, USB-C, and various voltage options, making it highly compatible with a wide range of electronic devices. This versatility is further enhanced by the ability to adjust the output voltage, which can range from 5V to 12V, depending on the connected device's requirements. The intelligent output management feature ensures optimal charging for each device, preventing overload and enhancing safety during use.

Another significant characteristic of the Tekkeon MP3450-10 and MP3450 is their compact and lightweight design. Built with portability in mind, they easily fit into backpacks and bags, making them ideal companions for travel, hiking, or business trips. The durable exterior casing not only ensures protection against everyday wear and tear but also makes the unit more resistant to environmental conditions.

Additional technologies incorporated into the MP3450 series include a built-in LED flashlight, which can be particularly useful in emergency situations or during outdoor activities. The easy-to-read battery status indicator allows users to monitor the remaining battery life, ensuring they are never caught off guard with a dead power bank.

Ultimately, the Tekkeon MP3450-10 and MP3450 represent a seamless fusion of performance, safety, and convenience. They cater to the needs of modern users looking for a reliable, portable power source that supports multiple devices, making them a valuable asset for anyone reliant on technology in today's fast-paced world.