PYLE Audio PNV4000, PNV3000, PNV2000 owner manual Operation

OPERATION

oCAUTION: DO NOT USE THIS INVERTER WITH THE FOLLOWING:

•Small battery operated appliances such as RECHARGEABLE FLASHLIGHTS,SOME RECHARGEABLE SHAVERS and NIGHT LIGHTS that are plugged directly into as RECEPTACLE TO RECHARGE

•BATIERY CHARGERS used with certain power tool battery pecks. These chargers will have a WARNING LABEL stating that DANGEROUS VOLTAGE ARE PRESENT AT THE CHARGERS BATIERY TERMINALS.

-WARNING:

Batteries contain corrosive materials and present an Energy Hazard. To prevent irritation and burns, wear protective wear and clothing, and take special care to ensure no metal tools or personal objects contact the battery terminals.

o The Power Source Connection

The power source must provide between 10.3 to 15.6 Volts DC and must be able to supply the necessary current to operate the load. The power source may be a battery or a well-regulated 12V1125A DC power supply. To obtain the power source must deliver(in amperes), you can divide the power consumption of the load (in watt) by 12 (the input voltage). For example, the load is rated at 1000 Watts, the power source must be able to deliver: (tOOOlI2)=80 Amp.

Connect the inverter directly to a 12 Volt battery, connect the BLACK cable to the to the NEGATIVE (0) and RED cable to the POSITIVE (+) terminal of the

and may cause permanent damage to the inverter. Do not use the system with positive electrical grounding. Be

sure to fasten all connections between battery chips and terminals.

3