Pioneer DEH-P6900UB operation manual Using ITS playlists, Creating a playlist with ITS programming

Section

03Available accessories

#If you do not operate functions except for ITS memo and TitleInput "A" within about 30 seconds, the display is automatically returned to the ordinary display.

Function and operation

Play mode, Random mode, Scan mode, Pause, Compression and TitleInput "A" op- erations are basically the same as that of the built-in CD player.

Notes

! If you select other discs during repeat play,

the repeat play range changes to

M-CD repeat.

! If you perform track search or fast forward/re-

verse during Track repeat, the repeat play

range changes to Disc repeat.

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot

Function name

Play mode

Operation

Refer to Selecting a repeat play range on page 16.

But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the multi-CD player are as below:

!M-CD repeat – Repeat all discs in the multi-CD player

!Track repeat – Repeat just the current track

!Disc repeat – Repeat the cur- rent disc

switch to TitleInput "A". The disc title has al-

ready been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with

Random mode

Refer to Playing tracks in random

order on page 16.

the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24

Scan mode

Refer to Scanning folders and

tracks on page 16.

tracks can be stored in the playlist.)

Pause

Refer to Pausing disc playback on

page 17.

Refer to Using compression and BMX on page 17.

Multi-CD player has DBE (dynamic bass emphasis) function instead

Creating a playlist with ITS programming

1Play a CD that you want to program. Push MULTI-CONTROL up or down to select the CD.

Compression of BMX.

2 Use MULTI-CONTROL to select

ITS play mode

The settings can be switched as below:

COMP OFF—COMP 1—COMP 2

—COMP OFF—DBE 1—DBE 2

Refer to Using ITS playlists on this

page.

ITS memo in the function menu.

3Select the desired track by pushing MULTI-CONTROL left or right.

4 Push MULTI-CONTROL up to store the

ITS memo

Refer to Using ITS playlists on this

page.

currently playing track in the playlist.

Memory complete is displayed and the cur-

TitleInput "A"

Refer to Entering disc titles on

page 17.

rently playing selection is added to your play-

list.

56 En